Minotaar Posted May 30, 2013 Share Posted May 30, 2013 Hi, I am the proud new owner of an H110 and a 350D. I was dissapointed that I did not find any short screws for mounting the H110 on the roof of the 350D, so I was forced to temporarily mount with the fans on top of the rad. This has negative implications for how other components fit into the 350D (notably, the rear exhaust fan now runs into the hoses, and if the h110 was mounted with the hoses on the other side, both 5.25" bays would be gone.) Can anyone point me to some short screws that work well for mounting the h110? Link to comment Share on other sites More sharing options...
Minotaar Posted May 31, 2013 Author Share Posted May 31, 2013 please help! Link to comment Share on other sites More sharing options...
wytnyt Posted May 31, 2013 Share Posted May 31, 2013 take one of the screws to a hardware store and get the length you need. Link to comment Share on other sites More sharing options...
vpapanik Posted September 24, 2013 Share Posted September 24, 2013 Hi, I am the proud new owner of an H110 and a 350D. I was dissapointed that I did not find any short screws for mounting the H110 on the roof of the 350D, so I was forced to temporarily mount with the fans on top of the rad. This has negative implications for how other components fit into the 350D (notably, the rear exhaust fan now runs into the hoses, and if the h110 was mounted with the hoses on the other side, both 5.25" bays would be gone. I have already ordered a 350D and a H110 and I found your post very helpful in order to understand how to fit the radiator+fans. I am planning to fit two AF140 fans below the radiator, blowing air out of the case. Moreover, I'd like the hoses to be on the back of the case in order to install a DVD on the front lower 5.25 slot. My question is : did you finally make it work ? Are the hoses blocked by the rear fan in any way ? I also read in this forum that you have to install the radiator first, and the MB next. Is that true ? I think that the problem of cutting the mounting screws short is not a big deal if you have a dremel or similar took. Thanks in advance. Link to comment Share on other sites More sharing options...
peanutz94 Posted September 24, 2013 Share Posted September 24, 2013 Can anyone point me to some short screws that work well for mounting the h110? Size you need would be 6/32x 3/8in long. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.