galeener Posted May 27, 2013 Share Posted May 27, 2013 I have been trying to find a Fan for the H 90 as my computer was pre built and they left the Original Cooler Master 140 mm behind the H 90 radiator. The specs are no where near the same and they will not send me the one I should have received. Is there any way to get the Corsair 140 mm fan that i should have received or a substitute that has near equal specs. I was also considering if I do find the correct fan of going to push pull with this system. I have been to the corsair site and there are no 140 mm fans listed in the parts section for these. Only the 120 mm fro the h 100 and below systems. Help please. Link to comment Share on other sites More sharing options...
HOODedAssault Posted May 27, 2013 Share Posted May 27, 2013 The blade design looks like they're just higher rpm AF 140 basically. I'd go with some push/pull af140 fan if you like quiet or some bitfenix spectre pro 140 (I have 5 in my case) which have 1.5mm/h2o at slightly higher speed than the af140 fan. To bad there are no sp140. Link to comment Share on other sites More sharing options...
galeener Posted May 27, 2013 Author Share Posted May 27, 2013 Issue is Af 140 are really low on the static pressure.. Some one has to make these for corsair would just be nice to know where I can get one or two. Link to comment Share on other sites More sharing options...
wytnyt Posted May 27, 2013 Share Posted May 27, 2013 this one should work well for you http://www.silverstonetek.com/product.php?pid=366 Link to comment Share on other sites More sharing options...
HOODedAssault Posted May 27, 2013 Share Posted May 27, 2013 No it wouldn't it has 120mm mounting holes. Look at the specs. I would grab 2 spectre pros n call it a day. They are only slightly lower static pressure. But also much lower rpm. Basically silent. Link to comment Share on other sites More sharing options...
wytnyt Posted May 27, 2013 Share Posted May 27, 2013 yes i see,guess i was too bz finding the right specs Link to comment Share on other sites More sharing options...
galeener Posted May 28, 2013 Author Share Posted May 28, 2013 I have seen a couple of swiftec fans the new one is a 140 mm. Seems to be rated around where I would need. I would just like to get an original I guess its just sore point with me that they didnt include the fan I paid for. Also isn't the one that comes with the h90 a pwm fan. Yes i looked at the silverstone and if it had been a 140mm mount i would have just bought one. Link to comment Share on other sites More sharing options...
galeener Posted May 28, 2013 Author Share Posted May 28, 2013 Well Just found this on another site. I know our fans we sourced from PowerLogic because they had a higher torque motor. We currently do not have an SP140 design. Quoted from corsair george from his post on overclock.net Possibly one of these 140*140*25mm PLA14025B12H ○ ▲ ● 12 0.4 4.8 1500 98.07 1.99 36.3 140*140*25mm PLA14025B12HH ○ ▲ ● 12 0.5 6 1800 114.39 2.61 41.4 Link to comment Share on other sites More sharing options...
dhale Posted July 13, 2013 Share Posted July 13, 2013 Can the H90 tubes be replaced? They look too short and I probably would like to mount this on the bottom of my PC as they have 140mm mounting holes. If this is not possible then my rear exhaust is only 120mm mounting holes. Does this mean I cannot use the H90 and have to go with an H50 or something? If so, I think the cooling effect would be much less effective for my Haswell CPU. The H90 gets good reviews. Link to comment Share on other sites More sharing options...
wytnyt Posted July 13, 2013 Share Posted July 13, 2013 Can the H90 tubes be replaced? They look too short and I probably would like to mount this on the bottom of my PC as they have 140mm mounting holes. If this is not possible then my rear exhaust is only 120mm mounting holes. Does this mean I cannot use the H90 and have to go with an H50 or something? If so, I think the cooling effect would be much less effective for my Haswell CPU. The H90 gets good reviews. no without modding which of course voids the warranty... Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 15, 2013 Corsair Employees Share Posted July 15, 2013 If you have not got the fan for the H90 please request an RMA and let me know the case number I will see what we can do to get the correct fan for you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.