kscott190 Posted May 24, 2013 Share Posted May 24, 2013 I'm using the default fans and a pair of Ultra Kaze 3000, both sets are in their own pp configuration and it's inside a HAF-X I'm using a H100i Link to comment Share on other sites More sharing options...
HOODedAssault Posted May 24, 2013 Share Posted May 24, 2013 MAN ! thats insane voltage. those are amazing temps for running over 1.4v on a first gen i7. I'm getting about same temps as you on my hex core in linx at 1.3v Link to comment Share on other sites More sharing options...
kscott190 Posted May 24, 2013 Author Share Posted May 24, 2013 MAN ! thats insane voltage. those are amazing temps for running over 1.4v on a first gen i7. I'm getting about same temps as you on my hex core in linx at 1.3v These EVGA boards seem to want a lot of voltage If I had a ASUS board I don't think i would need as much for the same speed Link to comment Share on other sites More sharing options...
Bryman Posted May 25, 2013 Share Posted May 25, 2013 ya for the voltage you have it set at...seems like good temps...i dont have that exact processor so cant tell you if you really need that much voltage or not Link to comment Share on other sites More sharing options...
wytnyt Posted May 25, 2013 Share Posted May 25, 2013 kscott,why not add your specs in your info so well all know whatcga got Link to comment Share on other sites More sharing options...
Radorix Posted May 28, 2013 Share Posted May 28, 2013 That's about right for an i7 960 @ 4.4ghz higher on that voltage then I would put my chip but I run mine 24/7 which is why I leave mine @ 4.2 ghz so I can use 1.365 volts instead well that and I run 7-7-7-20 @1603mhz memory timings. Well that and this generation of i7 performance plateaus right around the 4.2ghz mark from benchmarks I've seen in the past Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.