Night_Wind Posted May 23, 2013 Share Posted May 23, 2013 Hello i am with a problem with my link2 in my corsair h80i.. I can't change the color i and dont see speed off h80i in past work perfect i have unnistal and install and its the same. Version 2.3.4816 Somebody can me help please??? Link to comment Share on other sites More sharing options...
Night_Wind Posted May 24, 2013 Author Share Posted May 24, 2013 http://imageshack.us/a/img248/4598/link2i.png I reeintall again and becomes this and no more see h80 fans and pump now someboy help please? Link to comment Share on other sites More sharing options...
wytnyt Posted May 24, 2013 Share Posted May 24, 2013 http://imageshack.us/a/img248/4598/link2i.png I reeintall again and becomes this and no more see h80 fans and pump now someboy help please? check the usb cord to insure its connected firmly,you may also try plugging it to another port is the h80 showing in link device tab? Link to comment Share on other sites More sharing options...
Night_Wind Posted May 24, 2013 Author Share Posted May 24, 2013 no its not showing in link device tab :S Link to comment Share on other sites More sharing options...
wytnyt Posted May 24, 2013 Share Posted May 24, 2013 no its not showing in link device tab :S then try another usb header and see Link to comment Share on other sites More sharing options...
Night_Wind Posted May 24, 2013 Author Share Posted May 24, 2013 same thing dont see the h80i funs and pumb on link2 Link to comment Share on other sites More sharing options...
Night_Wind Posted May 24, 2013 Author Share Posted May 24, 2013 its solved thanks for help. I install without USB of h80i connected i plg in the USB after install link2 and its work fine ;) Link to comment Share on other sites More sharing options...
Night_Wind Posted May 24, 2013 Author Share Posted May 24, 2013 same problem again but i can see the H80i funs and pump but dont see speed off fans and pump omg some help please. Link to comment Share on other sites More sharing options...
Night_Wind Posted May 24, 2013 Author Share Posted May 24, 2013 i install and thats ok i can control speeds fans of h80 and color leds all its ok, when i reboot the computer same problem as see on image, i cant controls speed fans of h80 and no control led as can see on image. I try the last version the beta -v2_4_4948 and the version thats is in corsair site v2.3.4816 http://imageshack.us/a/img341/4623/link2v24.jpg Somebody can give me a hand to solve this please? Many thanks. Link to comment Share on other sites More sharing options...
wytnyt Posted May 24, 2013 Share Posted May 24, 2013 it really seems like you have a m/b that doesnt share usb headers,the hydro needs an almost proprietary connection.you could use a mini usb to usb cable and hook the cooler to an external port.hopefully m/b software will better address this in the future. Link to comment Share on other sites More sharing options...
Night_Wind Posted May 24, 2013 Author Share Posted May 24, 2013 it really seems like you have a m/b that doesnt share usb headers,the hydro needs an almost proprietary connection.you could use a mini usb to usb cable and hook the cooler to an external port.hopefully m/b software will better address this in the future. how i do that? in the one end of cable is mini USB to connect to cooler up to processor, the other end of the cable its connect to mother board and isnt usb i think dude i go check better Link to comment Share on other sites More sharing options...
Night_Wind Posted May 24, 2013 Author Share Posted May 24, 2013 its usb thats connect at motherboard u say to buy a adaptor and connect at external usb port? Link to comment Share on other sites More sharing options...
wytnyt Posted May 24, 2013 Share Posted May 24, 2013 its usb thats connect at motherboard u say to buy a adaptor and connect at external usb port? yes or a cable made as such,if wanted i can post a url of one. ramguy also made a very good suggestion in another post mentioning that to check to see if theres any updates on the m/b controller for usb.when i got my h100i's i automatically went to a rear usb and both have had 0 problems. Posted by Ramguy: I would check for the latest MB drivers from the chipset and or USB PHY manufacturer. I seen the same issue with a Gigabyte MB and had to get the latest USB 3.. 0 Driver from AMD because the MB makers driver was not new enough. It appears that the USB 2.0 Ports are piggy backed off of the USB 3.0 Controller and would not see some of the devices till I install the latest Chipset and USB 3.0 drivers from AMD. Link to comment Share on other sites More sharing options...
Night_Wind Posted May 25, 2013 Author Share Posted May 25, 2013 i will try drivers of mother bord now Link to comment Share on other sites More sharing options...
Night_Wind Posted May 25, 2013 Author Share Posted May 25, 2013 same thing omg Link to comment Share on other sites More sharing options...
Bryman Posted May 25, 2013 Share Posted May 25, 2013 try a mini usb to regular usb...you can buy one for like 5 dollars...and you can always use it in the future with something else Link to comment Share on other sites More sharing options...
wytnyt Posted May 25, 2013 Share Posted May 25, 2013 try booting with no usb devices connected,mouse,kb,flash drive ect.. you can plug the mouse back in after boot to control things. Link to comment Share on other sites More sharing options...
Night_Wind Posted May 29, 2013 Author Share Posted May 29, 2013 try a mini usb to regular usb...you can buy one for like 5 dollars...and you can always use it in the future with something else this result!!!! its the cable wit problems? Link to comment Share on other sites More sharing options...
Bryman Posted May 31, 2013 Share Posted May 31, 2013 if you tried the mini usb to usb cable and you know the cable works fine with other things and you tried unplugging all other usb devices when you tried the mini usb to usb cable and that didnt work then your unit might just be faulty Link to comment Share on other sites More sharing options...
PivetPoint Posted May 31, 2013 Share Posted May 31, 2013 So the unit is view able using that cable? Link to comment Share on other sites More sharing options...
Night_Wind Posted June 6, 2013 Author Share Posted June 6, 2013 corsair send-me a new cable kit and the problem is resolved :biggrin: Link to comment Share on other sites More sharing options...
Toasted Posted June 7, 2013 Share Posted June 7, 2013 If the included LINK USB cable is faulty, request an RMA and ask if they can send you a replacement cable. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.