Jump to content
Corsair Community

650D gpu support


jado88

Recommended Posts

I recently installed a second 670 into my system and noticed it was sagging slightly. I was wondering if corsair made anything that could offer an extra bit of support so that the weight of the card isn't solely on the back slot If corsair don't make anything like this can anyone link me to something that could help me out, cheers :biggrin:
Link to comment
Share on other sites

I recently installed a second 670 into my system and noticed it was sagging slightly. I was wondering if corsair made anything that could offer an extra bit of support so that the weight of the card isn't solely on the back slot If corsair don't make anything like this can anyone link me to something that could help me out, cheers :biggrin:

 

Just get some acrylic, wood, delrin or black plastic rod and cut a length to reach the case bottom. Stick it in place using double-sided tape or a dab of sticky putty. Put a second one between the second card and the first.

Link to comment
Share on other sites

Just get some acrylic, wood, delrin or black plastic rod and cut a length to reach the case bottom. Stick it in place using double-sided tape or a dab of sticky putty. Put a second one between the second card and the first.

 

It's a gigabyte 670 windforce with 3 fans so there isn't really anywhere I can prop it up, plus I don't really like the idea of putting something so close to the fan in case it falls and chews up the fan blades.

Link to comment
Share on other sites

It's a gigabyte 670 windforce with 3 fans so there isn't really anywhere I can prop it up, plus I don't really like the idea of putting something so close to the fan in case it falls and chews up the fan blades.

 

There's an ample flat spot on the shroud, on centerline at the extent. If you stick it in place, it won't fall.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...