iSpitfire Posted May 19, 2013 Share Posted May 19, 2013 Sometimes my Corsair Link farts out and the PSU fan RPM shows 0 RPM even though the fixed % is at 40%. If I try and fight it to get it to spin, my computer violently turns off like someone cut the power. Then when I get back into link after the self-reboot im able to control RPM. This has happened twice so far and im super hypochondriac because I already had a AX1200i die on me. Does this sound hardware or software related? I updated to new beta drivers to see if it will happen again. Link to comment Share on other sites More sharing options...
Toasted Posted May 19, 2013 Share Posted May 19, 2013 Is the problem still occurring in the beta software? Are you using the USB Dongle (Included with the AXi PSUs) or the LINK Kit? Link to comment Share on other sites More sharing options...
Bryman Posted May 19, 2013 Share Posted May 19, 2013 its because the corsair link for the psu is a little slow give it a few min maybe try setting back to default speed then back to fixed and wait a few more min...repeat steps until it gets working source: i have an AX860i :) 0rpm is completely normal it has fanless speed just dont let it go above 50C and ur fine Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.