Gman72 Posted May 19, 2013 Share Posted May 19, 2013 Looks like im going to install the software. Now I don't know what firmware my commander fan and light nodes are. I believe I have the first firmware when 1st came out. I never used the software after a fresh install of windows 7. My question is do I have to update the firmware to current to use new software? I really only want to change the pretty colors and save the led settings everything else I don't care of because I do not use this thing on critical parts or fans. Link to comment Share on other sites More sharing options...
wytnyt Posted May 19, 2013 Share Posted May 19, 2013 open up link and click on options/device and then click on ''device information'' and post a screenshot of that or post what firmware you have. you should have 1.1.9 ffor your lighting node yours should be that as i dont recall a update ever for that Link to comment Share on other sites More sharing options...
Gman72 Posted May 19, 2013 Author Share Posted May 19, 2013 So go ahead and install software then check, right? sorry maybe dumb to verify just making sure Link to comment Share on other sites More sharing options...
wytnyt Posted May 19, 2013 Share Posted May 19, 2013 So go ahead and install software then check, right? sorry maybe dumb to verify just making sure id say it has that firmware but either way you can install it. Link to comment Share on other sites More sharing options...
Gman72 Posted May 19, 2013 Author Share Posted May 19, 2013 also doesn't show anything about any of the corsair commander fan or led node. Also shouldn't the H100 show up? I do have it linked correctly but I can still change the fan speeds via push button (little man not lighting up) Also I don't see where u can change the led's Link to comment Share on other sites More sharing options...
Gman72 Posted May 19, 2013 Author Share Posted May 19, 2013 I have 4 fans on the H100 but when I did the firmware update now 3 of the four will work. I reset the h100 and the fan kick on but upon restart the dam fan wont run or register per screen shots. Any suggestions? H100 have a firmware update I need screenshot shows firmware number Link to comment Share on other sites More sharing options...
Gman72 Posted May 19, 2013 Author Share Posted May 19, 2013 I reset H100 to factory and GTG. Works great and was worth the wait. Link to comment Share on other sites More sharing options...
wytnyt Posted May 19, 2013 Share Posted May 19, 2013 sorry i fell asleep on you last night,good to see you got it going Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.