pmistrata Posted May 17, 2013 Share Posted May 17, 2013 I am starting this thread to discuss specifically the issues that are new or unresolved with the 2.4.4948 -BETA. Issues I am currently having is: Corsair Link Hardware monitor is not pulling up sensors or fans upon wake along with led settings. Fan is making a growling noise now when it did not before but not irritating me enough just yet. Hard drive, my corsair force 3, and radeon hd 7800 sensor is not showing up on my readings. The western digital and radeon hd 7800 shows up after awhile of running. Corsair force 3 does not. Functionality SUGGESTIONS: Motherboard and fans that are connected to the motherboard readouts. So I can get rid of AI Suite conflicts. Hard drive activity monitoring and led activity indications for multiple hdd/ssd systems. Alos reading memory activity and usage through the software. Update firmware pulls you to a firmware page. Corsair link adapter kit that includes a cables to connect to corsair dominator directly. Hope this helps :biggrin: It's the little things that can make this solution all it can be! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 17, 2013 Corsair Employees Share Posted May 17, 2013 Motherboard and fans that are connected to the motherboard readouts. So I can get rid of AI Suite conflicts. A: AI Suite and C-link are not compatible and cannot co-exist at all, if its loaded you will need to close it to use C-Link or Vise verse Hard drive activity monitoring and led activity indications for multiple hdd/ssd systems. Also reading memory activity and usage through the software. A: Thanks we will pass it along. Update firmware pulls you to a firmware page. A: I am sorry but can you be more specific? Corsair link adapter kit that includes a cables to connect to corsair dominator directly. A: Sorry but at this time that is not possible. Link to comment Share on other sites More sharing options...
pmistrata Posted May 17, 2013 Author Share Posted May 17, 2013 Thanks RAMGuy. The firmware page is a list of corsair link firmware or software for updating the device. Like you have posted on the Corsair Link Forum. Just click update firmwar in the devices area and either a link will be posted on the dialog page or it brings you there automatically. That would be great! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 21, 2013 Corsair Employees Share Posted May 21, 2013 We are working on that for the future but at this time we are restricting the firmware releases because of other issues. Link to comment Share on other sites More sharing options...
pmistrata Posted May 25, 2013 Author Share Posted May 25, 2013 New issue has occurred. My temp sensor three is not relaying information through corsair link. It is detected by my cooling node but not showing up on my corsair link. Link to comment Share on other sites More sharing options...
wytnyt Posted May 25, 2013 Share Posted May 25, 2013 New issue has occurred. My temp sensor three is not relaying information through corsair link. It is detected by my cooling node but not showing up on my corsair link. swap positions with another on the node to isolate the problem of being the node connection or sensor make sure power at rear is disconnected before doing so ive also noticed putting too much pressure on the head will sometimes produce a 0 reading Link to comment Share on other sites More sharing options...
pmistrata Posted May 26, 2013 Author Share Posted May 26, 2013 That helps. Its back now Link to comment Share on other sites More sharing options...
wytnyt Posted May 26, 2013 Share Posted May 26, 2013 it must have been a connection issue,the connectors being so small are quite finicky glad your up n running. Link to comment Share on other sites More sharing options...
deema Posted June 10, 2013 Share Posted June 10, 2013 Another couple of issues regarding 2.4.4948-beta version. In my configuration (see the profile) the Corsair Link Console does not autostart with OS (Win7x64) due to "appcrash". Seems the appcrash occures due to application start without waiting for appropriate service to become ready. When the application is started manually or once more time just after crash, it starts perfectly. The management console is not able to READ the power supply fan control setting during start. For example, if my AX860i fan is set to "40%" mode before restart, after restart console will display "Default" setting, despite of the actual fan setting to "40%". Please, take that into account while preparing the release. Link to comment Share on other sites More sharing options...
pmistrata Posted June 16, 2013 Author Share Posted June 16, 2013 Upon wake my computer goes to default white lighting although I have it set up differently. I have to then close the application completely hardware monitor and all to recover color settings. Link to comment Share on other sites More sharing options...
wytnyt Posted June 16, 2013 Share Posted June 16, 2013 Upon wake my computer goes to default white lighting although I have it set up differently. I have to then close the application completely hardware monitor and all to recover color settings. you can go into bios and set your usb devices to stay powered on during sleep,this may help Link to comment Share on other sites More sharing options...
pmistrata Posted June 20, 2013 Author Share Posted June 20, 2013 you can go into bios and set your usb devices to stay powered on during sleep,this may help I have it setup that way already and I know because my mouse stays lit and the corsair commander flashes green and red in sleep mode. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 20, 2013 Corsair Employees Share Posted June 20, 2013 We have seen that issue when it wakes from S3 or suspend or sleep it may not enumerate the USB devices properly but this can be over come in most cases by restarting the application after closing it. Link to comment Share on other sites More sharing options...
pmistrata Posted June 20, 2013 Author Share Posted June 20, 2013 We have seen that issue when it wakes from S3 or suspend or sleep it may not enumerate the USB devices properly but this can be over come in most cases by restarting the application after closing it. That is what I have been doing to correct these suspend issues. Hopefully this issue gets resolved in the next corsair link software update. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted June 20, 2013 Corsair Employees Share Posted June 20, 2013 We are looking into that but I have no ETA at this time. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.