Jump to content
Corsair Community

Configration for Gigabyte Z77X UD3H + Vengeance CMZ8GX3M2A1866C9


Recommended Posts

Friends i wanted help regarding the Settings in particular for my Motherboard & RAM

when i use My RAM to Defaults ie XMP Disabled ie 1333MHz i get good performance

but when i set my RMA in XMP with enabled and profile 1 wihn all auto settings my System sometimes shows little Glitches in jumping mouse freezing fr moment though its negligible n i used RMA on Defaults only fr 2 weeks now i want to go fr wt i buyed on ie 1866 MHz

So do tell me Correct Configurations for same

AND important is tht my Motherboard whn ever i apply fr XMP has settings comes by profile 1 showing full 1866MHz in it with 8 GB of it

and also in CPUz it shows good 8GB with 934x2 sets :biggrin:

System Specs

Windows 8 x64 extreme edition R2

Intel i5-3570K no OC'ed

Gigabyte Z77X-UD3H rev.1.1

Corsair Vengeance 1866MHz 2x4GBCMZ8GX3M2A1866C9 ver.5.12

Seagate 500 GB HDD

Nvidia G force GT 9500

500 watt Gold Power supply


So do reply n help


Link to comment
Share on other sites

Sounds as if you just need to adjust the DIMM voltage alittle to get your memory overclock stable.


Make sure you have the latest BIOS of course then load set-up or optimized defaults. , enable the XMP profile, but manually adjust the memory voltage to 1.6v


Let us know how that works for you or if anything changes.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...