ronnieburns Posted May 10, 2013 Share Posted May 10, 2013 Hi guys. I wanna replace the stock fans on my H100i but have a few questions I hope you can help with. Looking at these fans. Scythe Gentle Typhoon 120mm 1850 RPM - 3 Pin AP-15's. I hear they are very good with good pressure and low noise. http://www.scan.co.uk/products/120mm-scythe-gentle-typhoon-1850-rpm-cooling-fan Will they fit under the top grill on the 600T? The stock H100i fans are already a tight fit under there. Can I connect them directly to the H100i just like the stock fans and control them through the LINK program? Thanks Link to comment Share on other sites More sharing options...
peanutz94 Posted May 10, 2013 Share Posted May 10, 2013 They will fit...they are the same size as the stock fans. Whether or not you can control them with the H100i is another story. Some say they work others can't control them. I really would suggest you stick with a 4 pin PWM fan if you plan on using the H100I for control. Link to comment Share on other sites More sharing options...
ronnieburns Posted May 10, 2013 Author Share Posted May 10, 2013 I have also read about people who have bought 4 pin pwm fans for the H100i and even they sometimes don't work with link. It seems to just be luck. Shouldn't any 4 pin pwm fans work with LINK2 on an H100i? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 21, 2013 Corsair Employees Share Posted May 21, 2013 I have also read about people who have bought 4 pin pwm fans for the H100i and even they sometimes don't work with link. It seems to just be luck. Shouldn't any 4 pin pwm fans work with LINK2 on an H100i? Technically speaking any 4 pin PWM fans will work, but we don't guarantee that it will recognize in corsair link. You are more than welcome to give it a try. Link to comment Share on other sites More sharing options...
ronnieburns Posted August 8, 2013 Author Share Posted August 8, 2013 they work fine ;) Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted August 12, 2013 Corsair Employees Share Posted August 12, 2013 Great thanks for taking the time to let us know! Link to comment Share on other sites More sharing options...
Orich Posted December 19, 2013 Share Posted December 19, 2013 You were able to mount H100i stock fans under the top grill? And close the snap on grill on top of them?? Can you show me pics? Link to comment Share on other sites More sharing options...
WULFcry Posted April 26, 2014 Share Posted April 26, 2014 You can take the plastic grill apart from the steel mesh top and cut out a section where the fans mount on the case. If done correctly, the top mesh will sit perfectly as if it was ment to without the tight bulge. I even had way more than enough space to add fan grills and was still able to close and secure the top. :) Link to comment Share on other sites More sharing options...
WULFcry Posted April 26, 2014 Share Posted April 26, 2014 Any 120mm x 25mm Fan will fit. 4pin PWM's will only work with the Corsair link Controller. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.