Wire Posted May 10, 2013 Share Posted May 10, 2013 The ports of my motherboard are not aligned with the rear i/o shield! Well, when I press back of case, The ports of my motherboard line up with rear i/o shield! But my video card allign well with case! This is a photo of my issue: http://imgur.com/I4MKmlI,3OSnMQa,vGBydUe http://imgur.com/I4MKmlI,3OSnMQa,vGBydUe http://imgur.com/I4MKmlI,3OSnMQa,vGBydUe http://imgur.com/EFvnhYi,1M3jf9h http://imgur.com/DTgh9AW Link to comment Share on other sites More sharing options...
peanutz94 Posted May 10, 2013 Share Posted May 10, 2013 Sorry, i can't see much wrong with that. Your cables clear and insert okay. If your talking about the sound jacks being slightly to one side thats not uncommon at all. Link to comment Share on other sites More sharing options...
Wire Posted May 10, 2013 Author Share Posted May 10, 2013 Sorry, i can't see much wrong with that. Your cables clear and insert okay. If your talking about the sound jacks being slightly to one side thats not uncommon at all. thanks for having responded to my question! I'm talking about the sound jacks being slightly to one side! ok, again! however, I tried to center them better by pressing the back of the motherboard tray, here's the result: http://i.imgur.com/QUNPkDQ.jpg http://i.imgur.com/cGgqYo9.jpg Link to comment Share on other sites More sharing options...
WesternDreaming Posted May 17, 2013 Share Posted May 17, 2013 hi hi. alot of factors could be contributing to this the case contours, back plate condition, irregular mobo stand threading, etc etc as mr,peanutz has said, ill second that this is normal it does seem to me that the i/o shield is slightly convex in the back of the case aperture :p Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.