Jump to content
Corsair Community

H100i - Commander Dead?


Recommended Posts

Hey everyone, I will try to keep this short and sweet.

I'm using a h100i with the 2 fans it comes with plus 2 sp120s (push/pull) on firmware 2.0.5, Windows 8 64-bit. I had the white LED on my commander (which im pretty sure is the default). My computer crashes randomly today, when i rebooted the LED was now red, and blinks very quickly one or twice on boot, and then shut off. Upon booting to desktop, the pump and fans read 0 in LINK and I cannot change the LED colors. But everything is running fine and the temps appear to be normal. I opened up my tower and reconnected/disconnected the USB cable, the only difference is now the LED stays solid red even after booting all the way, all the other issues remain.


I have a bad feeling I'm going to be told to RMA it, in which case I'm not going to be very thrilled to say the least. This unit is less than 5 months old, and its not like im in there tinkering all the time. I'm really hoping its something silly like the usb cable, but I'm never that lucky lol. Either way, I appreciate any help and/or advice anyone can give. Please let me know if you have any other questions, I will do my best to answer them as quickly as possible.

Link to comment
Share on other sites

  • Corsair Employees
I tried the cable as you requested, unfortunately nothing has changed. All the symptoms remain.


I'd recommend that we replace that unit for you. Please use the link on the left and start the RMA process.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...