delpy8 Posted May 6, 2013 Share Posted May 6, 2013 Hi guys Can someone explain why i can control the two fans included with h100i but when i connect The sp120s or 140s they show on corsair link but cannot change the speed.??? Link to comment Share on other sites More sharing options...
Ash_0 Posted May 6, 2013 Share Posted May 6, 2013 Because the fans included with the H100i are made to work with the H100i, the 3pin SP/AF fans aren't. If you want to use your SP120s with the H100i, you need the PWM version of these fans, not the 3pin version. Link to comment Share on other sites More sharing options...
delpy8 Posted May 6, 2013 Author Share Posted May 6, 2013 DOH im a plum should of known that sorry Link to comment Share on other sites More sharing options...
Ash_0 Posted May 6, 2013 Share Posted May 6, 2013 No need to apologize, it's logical to assume that corsair fans would work with corsair devices. If you already have some SP120 3pin fans, you can request an RMA and Corsair will get them replaced for the SP120 PWM you need. Sadly, there's no PWM version for the AF's fans yet. Link to comment Share on other sites More sharing options...
delpy8 Posted May 8, 2013 Author Share Posted May 8, 2013 hi Ive just bought a pair of sp120s pwm version now to find 8 screws? any idea where to get an extra set Link to comment Share on other sites More sharing options...
wytnyt Posted May 9, 2013 Share Posted May 9, 2013 hi Ive just bought a pair of sp120s pwm version now to find 8 screws? any idea where to get an extra set hardware store is the best and easiest place to get more for a few cents. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted May 9, 2013 Corsair Employees Share Posted May 9, 2013 In case you need the spec; The screw thread and length are 6 -32 x 1 1/4" #6 machine thread, 32 TPI (threads per inch), 1.25 inches in length. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.