saione Posted April 30, 2013 Share Posted April 30, 2013 Hi guys! Finally i succeded in runing CL at startup. Running a new game on the pc i notided that the fan my graphic card (SAPPHIRE HD4890 Toxic) remained at low speed heating up the chippset of card up to 60°C. I immediatelly run the fan top speed cooling it down to less than 40°C. I tryed several combinations of mode (performance, balanced etc.) and a custom curve without any results. Fan remains at 1400-1500 RPM over a maximum of 3000 RPM. Any help is welcome ! Thanks in advamce Link to comment Share on other sites More sharing options...
wytnyt Posted April 30, 2013 Share Posted April 30, 2013 you may have to go into your graphics card software to allow the fan to be controlled,i had to do mine like that. Link to comment Share on other sites More sharing options...
Toasted Posted May 1, 2013 Share Posted May 1, 2013 The LINK Software can control some GPU fans but not all. Link to comment Share on other sites More sharing options...
wytnyt Posted May 1, 2013 Share Posted May 1, 2013 once i removed the auto fan speed it controls mine quite well. Link to comment Share on other sites More sharing options...
saione Posted May 3, 2013 Author Share Posted May 3, 2013 It works now .... simply the fan was not into the same group of the GPU temperature !!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.