Jump to content
Corsair Community

Corsair h100i and corsairlink problems


Kellen17

Recommended Posts

Hello,

When I bought the h100i and installed into my new build it was not recognized. So I read some threads about the "two usb's in the motherboard" problem. I took out another usb device and the system saw the h100i properly. When I opened corsairlink it still was not seen. I uninstalled and re installed corsairlink, downgraded to an older version, and also tried plugging the usb into the back with a wire i found lying around. Still nothing so I came here. Any suggestions?

Note that the h100i is working fine and keeping my cpu cooled. :laughing:

Link to comment
Share on other sites

  • Corsair Employees
Under Device Manager, do you have anything there that is an unknown device? Do you have USB connected to the front I/O ports of your case? If you do, unplug them and leave the H100i's USB cable by itself. Uninstall the SW and re install it back.
Link to comment
Share on other sites

  • 1 month later...
I have a similar problem in my h100i, LED and one of the two fans stop working, if I change the fan cable from the port (ports that are on the pump) it will restart the 2 fans, but the LED does not light the status of the h100i, pump and fans do not appear in CL2, how can I fix this?
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...