BigDaddyShane Posted April 21, 2013 Share Posted April 21, 2013 I got a new H100i. I downloaded the latest Software version. The software sees and identifies my Hardrive, CPU, and Vid card correctly but it doesnt report the h100i at all. I am running Windows 7 and have a MSi Z77 Gd65 motherboard. I have the cable to the pump plugged into one of the motherboard Usb 2.0 headers. There is nothing else plugged into any other USB headers and the only thing I have plugged into the USB 2.0 port is a Bluetooth dongle and my mouse.. I do not have a Corsair Commander... The h100i is working and as far as I can tell Windows sees the hardware profile. I have no idea what firmware version I have for the h100i and I really have no idea about how to flash firmware or even if I should... Any help would be appreciated Link to comment Share on other sites More sharing options...
wytnyt Posted April 22, 2013 Share Posted April 22, 2013 try hooking the hydro to a different usb header Link to comment Share on other sites More sharing options...
BigDaddyShane Posted April 23, 2013 Author Share Posted April 23, 2013 Problem solved.. Thank You. I looked to see what was on each header and put the h100i on a header by itself and Corsair Link worked instantly allowing me to change profiles and the color of the LED just fine.... Link to comment Share on other sites More sharing options...
wytnyt Posted April 23, 2013 Share Posted April 23, 2013 good to know,even so all m/b usb ports are ''married'' and still may cause a momentary glitch depending on hookups and whats being done i just run my to the rear usb and its working flawlessly on all my builds. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.