KMB Posted April 19, 2013 Share Posted April 19, 2013 Hello How can i reset the 3 colors on the Corsair Link LED module under LED mode "temperature"? I want to revert to the factory colors - the brigt blue, green and red. I have tried to renstall the software, update the firmware, move the data link cable from the LED module to another channel and more, but without any luck. For some odd reaso the 3 colors can not be selected in the color box. Kind Regards KMB:confused::confused: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 19, 2013 Corsair Employees Share Posted April 19, 2013 What version of our software are you using and under Options / Devices can you expand the Corsair Commander and Lighting node and post a screen shot Link to comment Share on other sites More sharing options...
Toasted Posted April 20, 2013 Share Posted April 20, 2013 You should be able to reset the colours by clicking the "Reset to defaults" under options. If that did not work. Delete the profiles folder and sierra2_ui.cfg in %Appdata%\Corsair Link to comment Share on other sites More sharing options...
KMB Posted April 20, 2013 Author Share Posted April 20, 2013 Hello I have tried to reset in options, but it did not reset the colors. I have allso tried to delete files and foldes, but that did not change the colors eigther. Here is a screenshot of the versions attached Link to comment Share on other sites More sharing options...
Toasted Posted April 21, 2013 Share Posted April 21, 2013 Deleting the profiles should restore any user changes. Do you mean the colours that are displayed on the LINK software are not the same colour as the L.E.D.s? Link to comment Share on other sites More sharing options...
KMB Posted April 21, 2013 Author Share Posted April 21, 2013 Hello No, the colors on the leds and on the screen follow each other ok. The problem is resetting the colors to the factory settings. See the attached file. The colors shown are not the factory default for LED 1. LED 2 does reset ok but not LED 1???????? Link to comment Share on other sites More sharing options...
Toasted Posted April 22, 2013 Share Posted April 22, 2013 Plug the Lightning node into a different device port on the Commander unit and see if that fixes it. Link to comment Share on other sites More sharing options...
KMB Posted April 22, 2013 Author Share Posted April 22, 2013 No, LED 1 is still not reset. I have tried to contact the support but no answer. Does anybode know how to get hold of Corsair support on this issue? Link to comment Share on other sites More sharing options...
KMB Posted April 22, 2013 Author Share Posted April 22, 2013 Does anybode know where the information about the colors are stored? On the pc or on the controller or on the LED module? Link to comment Share on other sites More sharing options...
Toasted Posted April 23, 2013 Share Posted April 23, 2013 You can contact Corsair support via by clicking the Request an RMA button, login in and click Ask a question. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 26, 2013 Corsair Employees Share Posted April 26, 2013 Please go to the system page and click on one of the LED's this is how you set the color. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.