tiger_irons Posted April 13, 2013 Share Posted April 13, 2013 :confused: Hi Guys, Great product the 500R, as the PSU too.:sunglasse I just build up a system, but at the end, seems that the frontal I/O panel doesn't works. I think to forgot to connect something, but i can't see inside any un-connected cable. :laughing: Exist a pdf with detailed steps about how to dismantle the frontal panel ? Thanks Ciao Paride::pirate:: Link to comment Share on other sites More sharing options...
Toasted Posted April 13, 2013 Share Posted April 13, 2013 Check the USB 3.0 connections. Check your motherboard's manual and see if you need to enable USB 3.0. Link to comment Share on other sites More sharing options...
tiger_irons Posted April 16, 2013 Author Share Posted April 16, 2013 Hi, Thanks for your reply and sorry for my delay...too busy with my work :sunglasse My Gigabyte Z77-UD5H works fine and has a lot of usb 3.0 connection, all active through the bios. I attached all the cables, but doesn't works. Exist a pdf with detailed instalaltion innstruction ? I found only a fast case description when arrived from Amazon. By the way, works all very fine with win7 and OSX ML installed with Chimera bootloader :cool: Thanks Link to comment Share on other sites More sharing options...
Toasted Posted April 16, 2013 Share Posted April 16, 2013 Have you tried reinstalling the chipset drivers? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.