AbSoluTc Posted April 9, 2013 Share Posted April 9, 2013 I posted this under the cooling section and I am linking it here.. http://forum.corsair.com/v3/showthread.php?t=117393 Anyone have any information on what screws are used with the stock rear fan on the C70 case? Those are the screws I need for the top of the case. The ones that come with the fans are too small and will pull through the grommet/holes. Link to comment Share on other sites More sharing options...
Mem11 Posted April 9, 2013 Share Posted April 9, 2013 I posted this under the cooling section and I am linking it here.. http://forum.corsair.com/v3/showthread.php?t=117393 Anyone have any information on what screws are used with the stock rear fan on the C70 case? Those are the screws I need for the top of the case. The ones that come with the fans are too small and will pull through the grommet/holes. I added 2 AF140's to the top of my case and used the Fan Screws(Short) that came with the case. If you look at your quick start guide, you should have 16 of them. The heads are a little wider than the ones that came with the AF140's, though they are a little smaller in length. Just make sure the fan is flush with the case when you screw them in and they should work just fine, at least they did for me. If they're missing from your package, contact CS and I'm sure they'll send you out some. Link to comment Share on other sites More sharing options...
jlhawn Posted April 9, 2013 Share Posted April 9, 2013 some C70's were shipped without all the screws by mistake, I put in for an RMA and explained the problem and Corsair sent me another complete package of all the screws, grommets, usb 3.0 adapter, motherboard standoffs, etc. so if your missing some screws then submit an RMA. Link to comment Share on other sites More sharing options...
AbSoluTc Posted April 9, 2013 Author Share Posted April 9, 2013 some C70's were shipped without all the screws by mistake, I put in for an RMA and explained the problem and Corsair sent me another complete package of all the screws, grommets, usb 3.0 adapter, motherboard standoffs, etc. so if your missing some screws then submit an RMA. This. I do not recall getting any screws with my setup or anything else. This would explain my issue lol. I searched high and low for the screws and had nothing. My buddy got the C70 in black and I helped him install all his new stuff and noticed his did come with a white cardboard box inside the HD tray inside the case. I will open a case with support and see if I can get a replacement. Thanks for the info guys! Link to comment Share on other sites More sharing options...
AbSoluTc Posted April 26, 2013 Author Share Posted April 26, 2013 some C70's were shipped without all the screws by mistake, I put in for an RMA and explained the problem and Corsair sent me another complete package of all the screws, grommets, usb 3.0 adapter, motherboard standoffs, etc. so if your missing some screws then submit an RMA. I just received my replacement kit and there are no standoffs and no USB 3 adapter. I know these come with the case because I helped my friend recently build a new system with the black c70 case. I saw what came with it. The screws that come with look to be for the motherboard and the hard drives. There are fan screws with grommets but none of those screws are any bigger than the screws that came with the fans. They are the same size actually. Is there anyone out there at Corsair that can help with this? Link to comment Share on other sites More sharing options...
jlhawn Posted April 26, 2013 Share Posted April 26, 2013 I would call them cause it sounds like they goofed again on your parts. my parts box they sent me came with 2 different size heads on the screwws and I got another usb 3.0 adapter and motherboard standoffs. in otherwords Corsair sent me another complete kit for my case. Link to comment Share on other sites More sharing options...
AbSoluTc Posted April 27, 2013 Author Share Posted April 27, 2013 I would call them cause it sounds like they goofed again on your parts. my parts box they sent me came with 2 different size heads on the screwws and I got another usb 3.0 adapter and motherboard standoffs. in otherwords Corsair sent me another complete kit for my case. Is there a way to post a picture of your box? Mine came with a SKU number on top. That would help me help them. If possible. Link to comment Share on other sites More sharing options...
jlhawn Posted April 27, 2013 Share Posted April 27, 2013 mine is just a small plain white box with no lables, it's the same as the box that was in my case when I got it, but had missing parts. the box is the size of a hard drive Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.