ng114 Posted April 7, 2013 Share Posted April 7, 2013 I installed an H80I into my system last night... Then by recommendation all over the internet I installed CorsairLink 2.3.4816. I tried to run it but the program does not start up and shows no signs of life whatsoever. I attempted reinstalling it multiple times and many reboots... The program just refuses to start and does not throw out any error messages. Any help would be appreciated. Thanks, ng114 Link to comment Share on other sites More sharing options...
wytnyt Posted April 7, 2013 Share Posted April 7, 2013 having installing it multiple times id suggest removing all of the softwarre,do a cold boot and install 2.3.4816 but first you need to uninstall corsair,then go to user/my documents/appdata/roaming/corsair and delete also c/programs x86/corsair cold boot once removed ill be here if needed Link to comment Share on other sites More sharing options...
ng114 Posted April 7, 2013 Author Share Posted April 7, 2013 having installing it multiple times id suggest removing all of the softwarre,do a cold boot and install 2.3.4816 but first you need to uninstall corsair,then go to user/my documents/appdata/roaming/corsair and delete also c/programs x86/corsair cold boot once removed ill be here if needed Thanks for replying :). I tried this and the result is the exact same no sign of life from the program. Link to comment Share on other sites More sharing options...
wytnyt Posted April 7, 2013 Share Posted April 7, 2013 i assume you have the hydro sata and usb cord plugged it right look in bios and make sure the pump is running,if so sata is good is corsair logo lit/ Link to comment Share on other sites More sharing options...
ng114 Posted April 8, 2013 Author Share Posted April 8, 2013 The pump is running and the logo is lit... In theory even if there were something wrong with this wouldn't link still start up and just tell me no pump is detected? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 11, 2013 Corsair Employees Share Posted April 11, 2013 When you run the program, make sure to check the tray icon, you probably have "Start Minimize" enabled. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.