dannaz423 Posted April 7, 2013 Share Posted April 7, 2013 Hello Corsair community I'm going to be moving my build to a 650D because I'm getting a H100i although I want to have led fans for the 120 exhaust and the 200 intake. I was looking at getting spectres or spectre pros although I have tried to do some research to see if these fans fit in the front of the case. From what I could find the spectre pros were too thick but the normal spectres fitted. Can anyone from personal experience clarify this? As soon as I am able to find this out I will be able to order all my parts. Tldr does the spectre pro 200mm fit in 650d or does only a normal? Thank you Link to comment Share on other sites More sharing options...
Toasted Posted April 7, 2013 Share Posted April 7, 2013 This thread should help. http://forum.corsair.com/forums/showthread.php?t=101729 Link to comment Share on other sites More sharing options...
dannaz423 Posted April 7, 2013 Author Share Posted April 7, 2013 This thread should help. http://forum.corsair.com/forums/showthread.php?t=101729 Thank you i hadn't found that thread. Don't know what the guy meant by he had to cut the little bars, though anyway I should be able to move the drive cage if worst comes the worst Link to comment Share on other sites More sharing options...
nickbickerstaff Posted April 7, 2013 Share Posted April 7, 2013 Hi! I have the 650D with Spectre Pro fans in the front, back and on my radiator. The fans fit fine everywhere. In the front the fan is just touching the hard drive cages but is still a fine fit. Link to comment Share on other sites More sharing options...
dannaz423 Posted April 8, 2013 Author Share Posted April 8, 2013 Hi! I have the 650D with Spectre Pro fans in the front, back and on my radiator. The fans fit fine everywhere. In the front the fan is just touching the hard drive cages but is still a fine fit. I'm thinking I will move the HDD bay next to the PSU even if it fits. I only have one drive so I don't need the extra cage. Do the spectre pro's light the 650D up very much or should I look into led strips? Link to comment Share on other sites More sharing options...
Seventh Posted April 30, 2013 Share Posted April 30, 2013 I've moved my HDD cage right back, adjacent to the PSU. I have the CM Megaflow up front; it has a slightly dimmer LED than the Spectre Pro. With the door on, you'll get some glow reflected in the main compartment, but it won't be extremely bright. But remember the H100i pump light/insignia IS very bright, considering its size. However, I have a blue LED strip running around the bottom of the door and up the rear of my 650D; for my tastes it might actually be a little OTT: http://i.imgur.com/PvxqiLB.jpg?1 Link to comment Share on other sites More sharing options...
dannaz423 Posted April 30, 2013 Author Share Posted April 30, 2013 I've moved my HDD cage right back, adjacent to the PSU. I have the CM Megaflow up front; it has a slightly dimmer LED than the Spectre Pro. With the door on, you'll get some glow reflected in the main compartment, but it won't be extremely bright. But remember the H100i pump light/insignia IS very bright, considering its size. However, I have a blue LED strip running around the bottom of the door and up the rear of my 650D; for my tastes it might actually be a little OTT: http://i.imgur.com/PvxqiLB.jpg?1 well I have everything now and I'm thinking of getting a strip along the bottom. Any suggestions? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.