xbit Posted April 4, 2013 Share Posted April 4, 2013 Hello, I only have green left on my h100i, everything else is working as intended. is it physically broken or should I hold on to hopes that a FW/SW update will fix down the road? I thought I remembered reading something in the forums that a FW update was around the corner that could fix my (our) LED issues? - Thanks Link to comment Share on other sites More sharing options...
Tillian Posted April 5, 2013 Share Posted April 5, 2013 I have the same problem with the GREEN and RED LEDs, I only have BLUE remaining. :( I hope it's just firmware/software too. Link to comment Share on other sites More sharing options...
Speed Posted April 5, 2013 Share Posted April 5, 2013 I'll trade you my Green for your Blue. Link to comment Share on other sites More sharing options...
Anth0789 Posted April 5, 2013 Share Posted April 5, 2013 Same issue here just green left. Link to comment Share on other sites More sharing options...
peanutz94 Posted April 5, 2013 Share Posted April 5, 2013 FW was just released a few weeks ago. I don't believe there is anything you can do but have it replaced. Link to comment Share on other sites More sharing options...
TofflaN95 Posted April 5, 2013 Share Posted April 5, 2013 I also have this problem! Both my red and green appears to be dead, but the blue one works great. I actually saw the green one broke. It was flashing rapidly until it suddenly stopped. Corsair thought I would send my H100i to them in the Netherlands, but it's gonna cost me about 40$ to do that. :( Edit: Both my red and green was dead, but today the red one started to work again. This seems very weird... Link to comment Share on other sites More sharing options...
Bryman Posted April 5, 2013 Share Posted April 5, 2013 my corsair link cable doesnt even ****ing work so i cant control LEDS fan speeds or even see my ****ing H80i temp iv tried everything...uninstalling usb dongle AND link software and reinstalling but nope guess what doesnt ****ing work...sigh...im really using the F word alot :( maybe a little too excessively... Link to comment Share on other sites More sharing options...
Tillian Posted April 5, 2013 Share Posted April 5, 2013 my corsair link cable doesnt even ****ing work so i cant control LEDS fan speeds or even see my ****ing H80i temp iv tried everything...uninstalling usb dongle AND link software and reinstalling but nope guess what doesnt ****ing work...sigh...im really using the F word alot :( maybe a little too excessively... Try unplugging every USB device except your mouse. Boot up your computer and then navigate to the LINK2 software and see if it then detects. Link to comment Share on other sites More sharing options...
Bryman Posted April 5, 2013 Share Posted April 5, 2013 ok not sure if my computer would boot then because one of the usbs connects to my usb i think or actually i think its for my power and disk usage LED but ill try that later...you mean like disconnect every single thing from the motherboard or what?...if you mean actual usbs only have keyboard and wireless mouse transmitter connected to my usbs...i really dont think thats the problem though...but who knows... Link to comment Share on other sites More sharing options...
Tillian Posted April 5, 2013 Share Posted April 5, 2013 ok not sure if my computer would boot then because one of the usbs connects to my usb i think or actually i think its for my power and disk usage LED but ill try that later...you mean like disconnect every single thing from the motherboard or what?...if you mean actual usbs only have keyboard and wireless mouse transmitter connected to my usbs...i really dont think thats the problem though...but who knows... Disconnect anything that uses USB. (Keyboards, USB Drives, etc.) The only USB device you should keep is your mouse. (Otherwise Navigation is obviously impossible.) Basically you're removing anything that can conflict with the H100i (I found my Logitech G15 Keyboard was the cause of most of the conflicts and as soon as I unplugged it before booting, LINK2 would see my H100i.) Link to comment Share on other sites More sharing options...
Bryman Posted April 5, 2013 Share Posted April 5, 2013 ok so just unplug my keyboard? dont unplug my power light LED disk light LED fans usb power plugs...nothing like that...got it Link to comment Share on other sites More sharing options...
Tillian Posted April 5, 2013 Share Posted April 5, 2013 ok so just unplug my keyboard? dont unplug my power light LED disk light LED fans usb power plugs...nothing like that...got it Basically yeah. Don't forget to post an update to say if that's worked or not. (Try rebooting your system at least 2 times if it doesn't detect before making a verdict.) :D Link to comment Share on other sites More sharing options...
Bryman Posted April 5, 2013 Share Posted April 5, 2013 ok ill do it sometime maybe not today...oh also is it normal that if i switch the plugs the H80i fans go into like they plug into the H80i block right? so if i switch them that only the inside fan works and not the outside fan?...you know the H80i comes with 2 fans...ok so like what im trying to say is theres 2 plugs for the fans because theres 2 fans...if i switch the plugs that i plug into the fans only one fan works...but if i switch the plug that the fan doesnt work and unplug the fan that it does work and plug the one that it doesnt work into the one that...ok im confusing myself...IF I UNPLUG the fan that i...ugh stupid adhd cant concentrate now :( ok...lol...if i unplug the fan that does work when only one of them works and plug the fan that didnt work into the plug that worked for the other fan then it works...so its not like that 1 plug doesnt work...just doesnt work for that specific fan...basically what im trying to say lol Link to comment Share on other sites More sharing options...
Bryman Posted April 5, 2013 Share Posted April 5, 2013 (HAVENT TRIED NO KEYBOARD THING YET) but with the link like first time i tried it gave my whole computer like 5 frames per second lol and second time i tried my disk usage was 100% but like first when i booted computer it was fine but like 5min later it started getting REALLY slow and then like 1 min later it froze my computer...and resource manager (in task manager) said first like 200000 bytes per second which is like... 2 or 20mb? and then said 0kb/s but still said 100% disk usage...and my cpu was low...wasnt like that was the problem then i just tried to open the start menu to restart my computer...it took 15 seconds for it to pop up! i just did a hard restart...also usually gives me a 15 second delay on bios if i keep it plugged in while i boot my computer...well havnt tried the no USB besides mouse but ill have to try that...doubt it will do anything...oh and btw i have a solid state drive which usually gets like 350mb/s read and 250mb/s write so i dont see how 200000 bytes per second and 100% disk usage is normal... Link to comment Share on other sites More sharing options...
Bryman Posted April 6, 2013 Share Posted April 6, 2013 ok tried having NO usbs at all connected to my usbs when i booted my computer after it booted i plugged my mouse in...nope didnt work...id say this thing is dead Link to comment Share on other sites More sharing options...
wytnyt Posted April 6, 2013 Share Posted April 6, 2013 did you do a cold boot? Link to comment Share on other sites More sharing options...
Bryman Posted April 6, 2013 Share Posted April 6, 2013 Yes I turned the computer off then turned it back on Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.