TimDK Posted April 2, 2013 Share Posted April 2, 2013 Hey guys i just installed the new firmware on my h100i to fix the problem with my RGB altho now i have the problem the computer cant find the cooler and says no cpu fans are connected. Link to comment Share on other sites More sharing options...
Darkwing Posted April 2, 2013 Share Posted April 2, 2013 Welcome to the jungle :headbang: Link to comment Share on other sites More sharing options...
TimDK Posted April 2, 2013 Author Share Posted April 2, 2013 :S lame.... :( why is it exactly corsair is a supposed quality company? Link to comment Share on other sites More sharing options...
Darkwing Posted April 2, 2013 Share Posted April 2, 2013 Did you uninstall the software, delete any profiles after updating FW? This might help. If not, join the ever growing club :-) Link to comment Share on other sites More sharing options...
TimDK Posted April 3, 2013 Author Share Posted April 3, 2013 yes i already tried that several times Link to comment Share on other sites More sharing options...
wytnyt Posted April 3, 2013 Share Posted April 3, 2013 Hey guys i just installed the new firmware on my h100i to fix the problem with my RGB altho now i have the problem the computer cant find the cooler and says no cpu fans are connected. try going to another usb port,the ports can be rather finicky and yes welcome to the club,even with a little bug here and there,these coolers are still the best on the market... Link to comment Share on other sites More sharing options...
Bryman Posted April 3, 2013 Share Posted April 3, 2013 ya never have been able to control my fans correctly...best i got to before i installed newer firm wares (like 1.04 and 1.05) was i would unplug and replug the fan controller in WHILE computer was running and it would let it control it for max of an hour then i would have to replug it in -.- anyways now just completely dead...gives pump rpm and water temp...besides that nothing...oh i was able to get it controlled for a second but then like the fan rpm things starting blinking red...anyway waiting for the new PWM fans to arrive and if that doesnt work idk this bull**** is starting to drive me crazy Link to comment Share on other sites More sharing options...
wytnyt Posted April 3, 2013 Share Posted April 3, 2013 ya never have been able to control my fans correctly...best i got to before i installed newer firm wares (like 1.04 and 1.05) was i would unplug and replug the fan controller in WHILE computer was running and it would let it control it for max of an hour then i would have to replug it in -.- anyways now just completely dead...gives pump rpm and water temp...besides that nothing...oh i was able to get it controlled for a second but then like the fan rpm things starting blinking red...anyway waiting for the new PWM fans to arrive and if that doesnt work idk this bull**** is starting to drive me crazy your problems describe a usb conflict with another device plugged in such as a flash drive,mouse ect... an easy work around is to plug your unit to a rear external usb port... Link to comment Share on other sites More sharing options...
Bryman Posted April 4, 2013 Share Posted April 4, 2013 well as luck has it one of my usbs in the front rubber piece fell off should i just use those pins or no? actually nvm wouldnt work different kind of pins...also can be dangerous if i try to use those right? sorry didnt get what your saying lol... sorry i knew you didnt mean plug it into an actual usb i was just kinda going crazy with that...anyway what do you mean lol and going to post a few funny smilies cause im bored..seriously though if i could get working would be great :P if the new PWM fans dont help it i dont want to send the whole unit back so ill have to live with it forever (kind of speaking) :P :damnit: :flamethro: :withstupi: :beatchair: :topicsuck: :wtfeh: Link to comment Share on other sites More sharing options...
wytnyt Posted April 4, 2013 Share Posted April 4, 2013 youll need a mini usb to usb cable and instead of plugging to a m/b usb heade,just run it out the back to one of your external usb ports im sure youll notice a big improvement Link to comment Share on other sites More sharing options...
Bryman Posted April 4, 2013 Share Posted April 4, 2013 Ok but the power cord to plug it in is a plug that only works for the motherboard right? And you need to plug in the USB to the h80i right? I'm talking about the fan controller of course... I mean I have 10 usbs I think and like half are USB 3.0 (although it only requires any USB) but I just don't know how that would work... Lol sorry typing on my iPad right now ugh Link to comment Share on other sites More sharing options...
wytnyt Posted April 4, 2013 Share Posted April 4, 2013 im not referring to the power,,but the cord that is connected to the motherboard usb header plug that into a usb 2,0 port on the rear of the case Link to comment Share on other sites More sharing options...
Bryman Posted April 4, 2013 Share Posted April 4, 2013 You mean this? http://imageshack.us/a/img138/8471/imageewp.jpg Link to comment Share on other sites More sharing options...
assassindk Posted April 4, 2013 Share Posted April 4, 2013 Think I am more or less in the same wagon - Updated to firmware 1.0.5 and now cant I see pump, Water temp and fan speed in CorsairLink. The fans run at 100% all the time and have tried with a "normal" USB cable to the rear of my case - nothing :( Link to comment Share on other sites More sharing options...
Tillian Posted April 4, 2013 Share Posted April 4, 2013 You mean this? http://imageshack.us/a/img138/8471/imageewp.jpg Yes he does, but he means instead of having the USB Header (Left) there will be a MALE USB Connector to connect to a USB port at the back of your PC. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.