Jump to content
Corsair Community

Cml4gx3m2a1600c9b


jabba2000

Recommended Posts

I looked here:

 

_http://www.corsair.com/learn_n_explore

 

I haven't seen the Corsair Vengeance Blue Low Profile CML4GX3M2A1600C9B 1600MHz 4GB (2x2GB) CL9

 

I have already ASRock Z77M, i5-3570 Ivy Bridge.

 

The above would be compatible RAM?

 

Thank in advance and sorry for bad English :cool:

Link to comment
Share on other sites

Possitive!

The Vengeance series was designed for the 2nd and 3rd generation of the Intel "I series" CPU's and is also backwards compatible to the x58 chipset MB's. It should run just fine!.

 

However I do have one suggestion for you and that is if you are going to be using a 64bit copy of Windows or LINx it would be best to think about an 8 gig kit. Windows will use about half of your four gig's . THat doesn't leave much for the rest of your system and it will slow it down.

 

This would be a MUCH better choice!

http://www.corsair.com/us/memory-by-product-family/vengeance/vengeance-low-profile-blue-8gb-dual-channel-ddr3-memory-kit-cml8gx3m2a1600c9b.html

Link to comment
Share on other sites

Possitive!

The Vengeance series was designed for the 2nd and 3rd generation of the Intel "I series" CPU's and is also backwards compatible to the x58 chipset MB's. It should run just fine!.

Very well :biggrin:

 

However I do have one suggestion for you and that is if you are going to be using a 64bit copy of Windows or LINx it would be best to think about an 8 gig kit. Windows will use about half of your four gig's . THat doesn't leave much for the rest of your system and it will slow it down.

 

This would be a MUCH better choice!

 

Yes, i know well the story, but is for licensed OS Small Office Home Office (SoHo) > W7 Pro 32 bit reads ± 3.250 to 4.096 MiB :mad:

 

My PC is 64 bit :cool:

 

Thanks anyway for the advice and speed of response :nodding:

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...