wowhero Posted March 30, 2013 Share Posted March 30, 2013 i formatted my memory, erasing all my drivers for my mouse and keyboard. After installing the firmware update, they started working again, but now i cannot find where to access the functions of my mouse or keyboard. i checked corsair website only to find the firmware update and profile setting. how can i again change the settings for my m90/k90? Link to comment Share on other sites More sharing options...
Toasted Posted March 31, 2013 Share Posted March 31, 2013 Do you mean the software for the K90 and M90? It should be included with the FW updater. M90 http://www.corsair.com/media/cms/drivers/M90update1.0.0.29.zip K90 http://www.corsair.com/media/cms/drivers/K90-Software-1_0_0_30.zip Link to comment Share on other sites More sharing options...
wowhero Posted April 1, 2013 Author Share Posted April 1, 2013 not exactly,they downloaded fully and what not. after installing the M90-FW for the first time, the application opened allowing me to customize my mouse. i just want to be able to change my settings again. Link to comment Share on other sites More sharing options...
Toasted Posted April 1, 2013 Share Posted April 1, 2013 Yes, that's the software. Check the start menu and see if you can find the shortcut to it. If not, check if it's installed by going to Programs and Features. Link to comment Share on other sites More sharing options...
wowhero Posted April 1, 2013 Author Share Posted April 1, 2013 After the firmware update is finished, all that happens (excluding the first time it was downloaded) is it stays on screen with a re-download and exit button. Other than that does not add anything else shortcuts or otherwise. Since I lost the original disc drives that came when i bought my mouse and keyboard, they both stopped working after i cleaned my hard drive. After installing the firmware update they started working, so they are both running solely on the firmware update(i thinks) Link to comment Share on other sites More sharing options...
Toasted Posted April 2, 2013 Share Posted April 2, 2013 There is a separate installer for the software named" M90 setup 1.0.0.29 080612.exe K90 setup 1.0.0.30 080612.exe The firmware updater does not install the software to configure your mouse and keyboard. You can download the required software and firmware update from the Corsair.com website as posted in post #2. Link to comment Share on other sites More sharing options...
wowhero Posted April 8, 2013 Author Share Posted April 8, 2013 thanks Toasted, i've been upgrading my computer as of late and haven't had much time on it. (i thought those were the uninstall applications when i first ran them) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.