excaka Posted March 29, 2013 Share Posted March 29, 2013 im just going to be doing a pull drawing hot air from the case out the radiator, and through the top. which one will be more ideal? quiet or performance? Link to comment Share on other sites More sharing options...
peanutz94 Posted March 29, 2013 Share Posted March 29, 2013 m just going to be doing a pull drawing hot air from the case out the radiator, You would still want the performance fans. But it would really be beneficial to use them as push drawing cooler air in from the top.and exhaust out the back. With your case and trying to suck the warm case air through the radiator will affect your temps considerably. Link to comment Share on other sites More sharing options...
excaka Posted March 30, 2013 Author Share Posted March 30, 2013 I have two 140 ad fans on the side as intake as well as two 120 high performance fans in the front, all pushing cool air in, if I made the h100 pushing air in that would mean the only exhaust I would have would be the 1 on the top back. Wouldn't that be way too much positive pressure in my case? Link to comment Share on other sites More sharing options...
Bryman Posted March 30, 2013 Share Posted March 30, 2013 i think it would be REALLY hard to have too much pressure in the case...also yes taking cool air from outside the case is MUCH better than taking the warm air from in the case Link to comment Share on other sites More sharing options...
excaka Posted March 30, 2013 Author Share Posted March 30, 2013 ok, yea i was just reading alot that it doesent matter if its push or pull? maybe i was reading wrong. so can i install the fans above the rad, but still in the case? Link to comment Share on other sites More sharing options...
excaka Posted March 30, 2013 Author Share Posted March 30, 2013 i keep reading, will buying a h110 be a better idea? i hear its the new asetek design compared to the h100i which is coolit? im not into the led, or monitoring system that the i series has. i just want it to work and last. and i keep hearing stories on this board that the h100i's people purchased are failing. also will it fit in the 550d case? Link to comment Share on other sites More sharing options...
excaka Posted March 30, 2013 Author Share Posted March 30, 2013 and will two af140 fans work on the h110? Link to comment Share on other sites More sharing options...
wytnyt Posted March 31, 2013 Share Posted March 31, 2013 i keep reading, will buying a h110 be a better idea? i hear its the new asetek design compared to the h100i which is coolit? im not into the led, or monitoring system that the i series has. i just want it to work and last. and i keep hearing stories on this board that the h100i's people purchased are failing. also will it fit in the 550d case? sorry a h110 will not fit unless some modding is done,i looked into that with my 550d since this is a support forum,problems will be here and doesnt accurately reflect the overall quality of the h100I Link to comment Share on other sites More sharing options...
excaka Posted April 3, 2013 Author Share Posted April 3, 2013 i really want to do push, with the fans under the radiator pushing hot air out the top of the case, will this be bad for the radiator over time? will it weaken it or damage it in any way? Link to comment Share on other sites More sharing options...
wytnyt Posted April 3, 2013 Share Posted April 3, 2013 i really want to do push, with the fans under the radiator pushing hot air out the top of the case, will this be bad for the radiator over time? will it weaken it or damage it in any way? not at all,its actually better to push air thru the radiator for better cooling... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.