Jump to content
Corsair Community

Corsair HX620W making a loud bang kinda noise when switched on


svarvakis

Recommended Posts

I have a Corsair 620HX for quite some time now, 3 years or possibly more. Lately it has been making a very loud noise whenever it's turned on at the switch in the back.

 

It sounds like a loud bang.. more like a snap, or the crack of a whip rather than a bang. It's difficult to explain.

 

Is this something that should worry me? I've recently upgraded my rig, so I took everything out and put it back in but it was doing in the previous rig and in the previous case as well. It's been happening for about 3-4 months or so.

 

Is this something I should be worried about? as in my power supply is living its last days?

Link to comment
Share on other sites

I have had two psu`s that made a loud pop sound when first switched on, the first one was the same model as yours and the other was a replacement Hx650. They both went the same way ie a pop when you first switched them on then they triped the mains then they died.
Link to comment
Share on other sites

Hi Svarvakis, the first one a Hx620 did it for about three months before it died, the replacement Hx650 did it for only a couple of weeks before it died. In both cases the noise was like a loud pop as soon as you switched it on but they both worked ok until they died.
Link to comment
Share on other sites

So I opened the case and used a hair dryer on cold-blow setting(ran out of compressed air and its all closed - easter sunday and all) and used the vacuum cleaner to suck out all the dust I could root out. Admittedly there was very little dust as I try to clean it as often as I can. I also changed the power lead just in case. There was still a pop noise although this time it wasn't as loud.

 

I guess from what you say it's just a matter of time. I wonder if there is anything to do in the house electrics that might affect it? not sure..:sigh!:

Link to comment
Share on other sites

Corsair decided to RMA the PSU and its on its way to Holland now so thanks Corsair :D:

 

My question now would be whether the HX620W would be capable to run 2 5850s in Crossfire.

 

I know it lacks the connectors but you can get a molex to pci-e connector for that purpose.

 

I've seen in reviews that it can deliver just under 60A in the 2 12V rails so would that be enough to run 2 ATI 5850's in Crossfire?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...