Jump to content
Corsair Community

Corsair H110 on Sniper 3 ?


west3690

Recommended Posts

Has any fitted a corsair H110 cooler to a Gigabyte z77 sniper 3 board. Im just at the "dry" fit stage and it looks like the retaining ring and pump head are going to hit the row regulators on the left hand side of the CPU socket.

 

If anyone has fitted the H110 or even the H100 (same Pump head and brackets) some reasurance would be great.

 

Thanks

Link to comment
Share on other sites

Thats what I'm worried about, why Gigabyte put the capacitors so close to and within the CPU cooling area I dont know.

 

Do you think I will be able to tighten down on the block enough without damaging or over heating the capacitors.

Link to comment
Share on other sites

Thats what I'm worried about, why Gigabyte put the capacitors so close to and within the CPU cooling area I dont know.

 

Do you think I will be able to tighten down on the block enough without damaging or over heating the capacitors.

 

before applying thermal paste,position the block and check clearance

ive also heard of others pushing the capacitors a little for room clearance

it can be done

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...