Jump to content
Corsair Community

Asus A8V Deluxe w/XMS4400


GideonTDS

Recommended Posts

I'm working on an Athlon FX 939 53. I have not ran any diagnostics yet, but the computer works fine with XP sp2 as long as you do not run any 3D intensive applications. I know he should switch to 3200, but now I'm curios if I can get it to work. It BSOD's about 10 seconds into 3dmark 2003. Could the XMS4400 just be to slow for the computer? What setting would you reccomend?
Link to comment
Share on other sites

  • 5 months later...
I would suggest you set the timimgs to Cass 3-3-3-8 and set the Dim Voltage to 2.8 Volts and see if that is not more stable!

 

 

I have the same setup and I want to get the most of this RAM. I was told 2.5-4-4-8. I see you told the guy above 3-3-3-8. Also what do I get the FSB too? If you can and also tell me what each number is for so I don't set it up wrong. The below is what I am using so far.

 

2.5 CAS

4 TRCD

4 TRP

8 TRAS

Link to comment
Share on other sites

Same CPU? 4400C25 or just 4400?

 

4400C25 Timings:

CAS Latency: 2.5

RAS to CAS Delay (tRCD): 4

Row Precharge (tRP): 4

Active to Precharge Delay (tRAS): 8

 

4400 Timings:

CAS Latency: 3

RAS to CAS Delay (tRCD): 4

Row Precharge (tRP): 4

Active to Precharge Delay (tRAS): 8

Link to comment
Share on other sites

Same CPU? 4400C25 or just 4400?

 

No, my CPU is just the AMD 64 3400+ w/4400C25. I had 1GB mushkin PC3700 HI Perf dual pack 2x512 running at 25-3-3-6 FSB 220 MHz. Core Speed is 2419.7 MHz runs great. But I read that my board can use the 4400C25, is that true? And if so what are the settings?

 

Thanks,

 

~´§ sIR nAGROM §`~

Link to comment
Share on other sites

Yes and no. The board can use them, however the CPU probably won't be able to hit 275 Mhz FSB to fully take advantage of them. To make sure everything's running fine, do what Ram Guy said and run them @ 200 Mhz, 2.5-4-4-8 and then test them.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...