deejayexe Posted March 21, 2013 Share Posted March 21, 2013 Hi! I received all my new hardware 4 March and i test it and also leds of h100i and was all ok in windows 8 with software link 2.2.0, but i format sdd because i want put a good partition with windows 8 and now installed a new version of link software and i cant see leds red, yellow and white but also with old version of link now i cant see anymore leds red, yellow and white. I can see this problems in everywhere that i read, but i want to know that it is a problem in hardware or software, because if i need a rma, i from Spain ( canary islands) and its only have few week and it is broken? And if i need to send it to return and customs maybe for me will be very expensive, and im little angry because i dont have any cooler for my new amd fx. Please tell me, thanks. Sorry for my english, i try to write that people that read it understand me. Link to comment Share on other sites More sharing options...
deejayexe Posted March 21, 2013 Author Share Posted March 21, 2013 Also i changed USB header, sata port, and USB , and i changed fan port in bump. I installed old version 2.2.0 link software and new but led red, white and yellow i dont see anymore. Also updated firmware but dont working. Link to comment Share on other sites More sharing options...
Pudfark Posted March 21, 2013 Share Posted March 21, 2013 I had the same issues with my H100i. I put the fans on a separate fan controller so I could control their speed. I removed CorsairLink. I took off the motherboard usb header. I hooked the pump up to the SATA connector. It cools just fine that way and is controllable. Which means that nothing is software controlled. The H100i works very well this way. The down side is that LED's are not controllable and no fan/temp profiles. I know this is not what you paid for and not what you wanted. It does work. I hope this is of some help to you. Link to comment Share on other sites More sharing options...
deejayexe Posted March 22, 2013 Author Share Posted March 22, 2013 I had the same issues with my H100i. I put the fans on a separate fan controller so I could control their speed. I removed CorsairLink. I took off the motherboard usb header. I hooked the pump up to the SATA connector. It cools just fine that way and is controllable. Which means that nothing is software controlled. The H100i works very well this way. The down side is that LED's are not controllable and no fan/temp profiles. I know this is not what you paid for and not what you wanted. It does work. I hope this is of some help to you. But how u said if i paid money for it, i wait that it working very well how i start with it. Now i updated CorsairLink to last updated and also firmware to 1.0.5, and sometimes one fan is to be crazy and in quietly mode go to maximum rpm. And also when i change colours randomly appeared white, red and yellow colour. So i think that problems are in software but if corsair don't update it i return to rma. My h100i video working and with colour fail, sorry for quality: Link to comment Share on other sites More sharing options...
Spikemaul Posted March 22, 2013 Share Posted March 22, 2013 I have a similar problem with my H100i. The green LED is the only one working so I decided to RMA the unit. I have a yellow/black theme in my PC and definitely want to use the LED's on the pump. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 27, 2013 Corsair Employees Share Posted March 27, 2013 Make sure that you guys are using the current version of the Corsair Link SW, V2.44948. If you have tried adjusting via LED control panel and the color does not work when changed to the color that you are selecting, then it must be the LED itself must have gone faulty. If this is the case, then please use the link on the left and submit an RMA and let us replace that unit for you. Link to comment Share on other sites More sharing options...
deejayexe Posted July 17, 2013 Author Share Posted July 17, 2013 Hi! I open one ticket for Rma about now is failure Led all colors, i cant see any color from very weeks ago. I check last firmware and last software and i cant see it more. And i put old version but led is over...and also i erase profiles and change usb port but i cant see any color! Finally i want a solution about Led's problems, thanks! My ticket in support is Ticket 6064363 Link to comment Share on other sites More sharing options...
Royster86 Posted July 17, 2013 Share Posted July 17, 2013 RAMGUY, Is there any news with regards to the permanent fix for the LED issue? Red and blue LEDs are broken and the green one is now strobing on my H80i. Thanks! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted July 17, 2013 Corsair Employees Share Posted July 17, 2013 Please check your email or lag into your case. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.