p33k Posted March 16, 2013 Share Posted March 16, 2013 Everything is working good except I do not see any readings for PCIe. It was working on the earlier software version. I have tried uninstalling it, deleting any instance of corsair from hdd and registry and re-installing. I guess I have to go back to the old software :( unless anyone has a suggestion? Thanks! Link to comment Share on other sites More sharing options...
p33k Posted March 16, 2013 Author Share Posted March 16, 2013 Disregard... installed v2.2 and saw that it did work. Uninstalled it and re-installed newest version and now it is showing?!? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 19, 2013 Corsair Employees Share Posted March 19, 2013 What Firmware is showing for the PSU? Should look something like this? Link to comment Share on other sites More sharing options...
p33k Posted March 23, 2013 Author Share Posted March 23, 2013 The 860i does not show a firmware, strange? Everything seems to be working fine now though. Besides it not showing the temps for my samsung 470 but does for my other drive. As I previously said I reverted back to 2.2.0 and then re-installed the newest. http://s22.postimg.org/vwxn94ju5/corsairlink.jpg Link to comment Share on other sites More sharing options...
Toasted Posted March 24, 2013 Share Posted March 24, 2013 I don;t think it has ever shown the FW version in the LINK 2.X.X software. Plug the AXi PSU into the H80i and see if that helps. Link to comment Share on other sites More sharing options...
hammong Posted March 25, 2013 Share Posted March 25, 2013 I've got a similar post on here about my AX1200i doing the same thing. Doesn't show any current being delivered in the individual PCie outputs. The only way I can get it to show something consistently is to run Prime95 and then the EPS +12V 8-pin will show 14-15A while the CPU is under load. If I stop Prime95, they all drop to zero. If I watch the figures long enough, it will flash 4-6A on some of the outputs from time to time, for a second or so, to back to zero. Buggy software. 2.2.0 wasn't any better when I tried it. Greg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.