nik111 Posted March 13, 2013 Share Posted March 13, 2013 Today I uninstalled the old 2.2.0 software and deleted all profiles. Rebooted and installed the Software Update Version 2.3.4816 .Everything was fine for a while then all of a sudden my asus p8z77-v pro reported a mother board temp of 124 F.I rebooted to check mb temp in bios and it showed 24 cel.Later after all was fine after reboot it showed a warning of 1.47 volts.Went into bios and it showed 1.3 volts.I never had this ever come up before since installing my h-100i 2 weeks ago. I uninstalled the new software and went back to the one before ver 2.2.0.Now all is good and no more weird motherboard temps and weird voltage volts popups.Just can not figure out why the new software would cause bum readings and the old 2.2.0 everything is fine.I even installed the new soft twice with the same result,looks like my pc does not like the new software.. .Weird or what...... Link to comment Share on other sites More sharing options...
Toasted Posted March 14, 2013 Share Posted March 14, 2013 What software were you using to monitor the motherboard temps? The LINK software and the other one may be conflicting with each other. Link to comment Share on other sites More sharing options...
Darkwing Posted March 14, 2013 Share Posted March 14, 2013 Had the same thing happening to me. Motherboard temp warning and voltage. I un-installed asus AI suite etc and had no warnings for several hours now. Link to comment Share on other sites More sharing options...
nik111 Posted March 14, 2013 Author Share Posted March 14, 2013 The software that gave me the two warnings was Asus AI suite also.I have no popup warnings with the previous software 2.2.0 though. Link to comment Share on other sites More sharing options...
Toasted Posted March 15, 2013 Share Posted March 15, 2013 The new software is probably conflicting with AI Suite. Link to comment Share on other sites More sharing options...
AlphaBravo Posted March 15, 2013 Share Posted March 15, 2013 I am also now getting warnings about my motherboard temp. I have AI Suite II installed. Before the Link software update, I was not getting these warnings. Link to comment Share on other sites More sharing options...
Darkwing Posted March 15, 2013 Share Posted March 15, 2013 The choice we have now is: do we un-install a perfectly fine and reliable working piece of software (AI-suite), so we can use a not so reliable (at the moment) piece of software from Corsair? Link to comment Share on other sites More sharing options...
Funambulus Posted March 15, 2013 Share Posted March 15, 2013 i only had this Problem once, all i did was uninstall them both install corsair first and when back then install Aisuite II, but i also think that ROG boards use a different version of Aisuite Link to comment Share on other sites More sharing options...
ZioZeb Posted March 15, 2013 Share Posted March 15, 2013 I have the same problems with my sabertooth z77, wrong read of temp and voltage. Link to comment Share on other sites More sharing options...
Raven0215 Posted March 16, 2013 Share Posted March 16, 2013 As I posted in the main update thread I am having the voltage issue as are others. Sounds like Corsair should get this on the list of things to fix since Asus software was working fine in the first place. Link to comment Share on other sites More sharing options...
Zeros and ones Posted March 16, 2013 Share Posted March 16, 2013 I am having this problem as well. I did not have this issue when my link 2.2.0 was working. With the new link, if I do not have it running, my AI Suite II does not show any errors. This new version does seems to break more things than fix. Link to comment Share on other sites More sharing options...
ACP Posted March 16, 2013 Share Posted March 16, 2013 I can confirm the same.... 2.2 no trouble other then accessing hdd every two seconds but 2.3 was conflicting with my intel mobo (intel desktop utilities monitoring software) and I had weird temp and voltage warnings plus everything seemed to be very buggy with the LEDs and not recognizing all my ssd... I installed 2.2 and will live the accessing until they update a new release Link to comment Share on other sites More sharing options...
reyhan_285 Posted March 20, 2013 Share Posted March 20, 2013 I have had all of the above, and I just had a cpu fan 0 rpm :L but it went back to normal shortly after, also I'm running AI suite II. Also does anyone know why they got rid of the HDD and SSD temp bits too I actually liked them. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.