ACP Posted March 12, 2013 Share Posted March 12, 2013 Hey ramguy....How do I delete the profile? I installed the latest version after uninstalling the old version but I didn't delete the old profiles which is prob why it's screwing up the new version...I can't save anything and my fan curves don't seem to work! Can you please tell me the procedure to install and uninstall this correctly with deleting the profiles . Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 13, 2013 Corsair Employees Share Posted March 13, 2013 Please go to Options then General you will see your profile listed select it then on the right side remove the profile Link to comment Share on other sites More sharing options...
ACP Posted March 13, 2013 Author Share Posted March 13, 2013 HI I did that and restarted the computer but nothing changed...my old fan curves are still there and are not working properly with the cpu temp ..only works with coolant temp....and also when I created a new profile and restarted the program, it didn't save any settings and yes I pressed the save button before restarting the program....this is very strange....I tried the 2.2 version and everything worked fine. Link to comment Share on other sites More sharing options...
apacheizm23 Posted March 13, 2013 Share Posted March 13, 2013 HI I did that and restarted the computer but nothing changed...my old fan curves are still there and are not working properly with the cpu temp ..only works with coolant temp....and also when I created a new profile and restarted the program, it didn't save any settings and yes I pressed the save button button restarting the program....this is very strange....I tried the 2.2 version and everything worked fine. That's because, once you remove the profile, than slide you're mouse over and click on SAVE. Link to comment Share on other sites More sharing options...
ACP Posted March 13, 2013 Author Share Posted March 13, 2013 Just tried that but when u click save it opens a window to save a new profile name... It has nothing to do with removing the old profile.... I also noticed that this new version is only showing 1 of 3 ssd I have while 2.2 version showed all 3 ssd... This program has more bugs then the old one..the only thing it doesn't do is access the ssd every 3 seconds like 2.2 did Link to comment Share on other sites More sharing options...
ACP Posted March 13, 2013 Author Share Posted March 13, 2013 Hey ramguy I think I might know what the problem is... I believe the fan curve settings are embedded into the actual h80i unit not the software or profile... I believe this is why the fan are acting crazy and not going by the profile I set on 2.3.4816 version..the firmware is conflicting with the new software version ....how do I flash the firmware to its original state? Or should I flash to 1.05 firmware? Link to comment Share on other sites More sharing options...
SpDFrek Posted March 13, 2013 Share Posted March 13, 2013 Flashing the firmware will overwrite the stored profile on the device. Since you have the new software installed I would flash to the 1.05 and you should be good to go. Link to comment Share on other sites More sharing options...
ACP Posted March 13, 2013 Author Share Posted March 13, 2013 Ok update....you need to update the firmware to 1.0.5 to reset the units custom fan curve if your coming from version 2.2...once I updated the firmware everything went back to default settings and now version 2.3.4819 fan curve works properly And yes there is a visual glitch with pinning the sidebar and its showing 1of 3 hdd drives I have ... It shows seagate drive Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.