pathfindercod Posted March 12, 2013 Share Posted March 12, 2013 Do you guys think the h100i would cool well enough in pull config? Link to comment Share on other sites More sharing options...
chuwawa Posted March 12, 2013 Share Posted March 12, 2013 I think it could work well enough if your room temp is cold enough... but then, you'll have to wear jacket while using your pc :D Link to comment Share on other sites More sharing options...
pathfindercod Posted March 12, 2013 Author Share Posted March 12, 2013 So not to well then.. Thanks.. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 12, 2013 Corsair Employees Share Posted March 12, 2013 Ideally, push configuration but that can always change depending n the situation. The different might be minimal so I would try both and go from there. Link to comment Share on other sites More sharing options...
mirkoj Posted March 14, 2013 Share Posted March 14, 2013 I have mine set up in pull config... fans bellow radiator pullin gin air, and case fan in my 800d case on the top back position is pulling air out. Pretty happy with cooling performance and a bit easier to just suck dust that accumulate from top of the case with vacuum cleaner and not much need to actually remove fans to clean between them and radiator. wainting for couple noctua nf-f12 fans to replace stock ones on h100i and also replace case fans as well and will use same pull in with radiator and push out case fans config Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.