Nicodemvs Posted March 10, 2013 Share Posted March 10, 2013 The title pretty much says it all; what type of screws are used to mount the corsair link commander? 6/32 (3.5" HDD screw) or M3 (2.5" SSD screw)? The reason I ask is that I have a Lian Li full tower case which has anti-vibration mounts for all 3.5" drives, which is cool and all, but it makes it awkward or impossible to mount any 3.5" drive that requires an M3 screw. I once had to re-thread the holes on an aluminium 2.5" to 3.5" adaptor so that I could mount my SSD. Link to comment Share on other sites More sharing options...
iWingers Posted March 11, 2013 Share Posted March 11, 2013 Not sure if this is helpful, because I don't know the screw sizes, but my 600T drive tray has 3.5" tool-less mounts that fit the Link Commander and my HDD as well. Link to comment Share on other sites More sharing options...
Nicodemvs Posted March 11, 2013 Author Share Posted March 11, 2013 Not sure if this is helpful, because I don't know the screw sizes, but my 600T drive tray has 3.5" tool-less mounts that fit the Link Commander and my HDD as well. That might help actually. Looking at a picture of the tool-less mounting tray for the 600T shows that it would use the corner screw holes on a standard 3.5" HDD. Assuming the Link Commander screw holes have the same arrangement as a 3.5" HDD it's likely they use 6/32 threaded screws. Link to comment Share on other sites More sharing options...
iWingers Posted March 11, 2013 Share Posted March 11, 2013 Well I'm using the same tool-less mounts for my 2TB HDD as the Commander. So I'm guessing it is the 6/32 :) Link to comment Share on other sites More sharing options...
robandcathy Posted March 12, 2013 Share Posted March 12, 2013 should be same as for hard drive. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.