Jump to content
Corsair Community

P5Q Se with 4x 2GB of CM2X2048-6400C5DHX


Recommended Posts

Hello I have freeze when i use more than 2 Sticks of Ram.

I have 4x CM2X2048-6400C5DHX.

Every Stick Single or Double work in every slot. Also Ram test.


But all together work only when i downclock the ram to 333MHz. Everything above gives me a freeze in Windows.

But i want the ram to run at stock 400Mhz or elsewhere i cannot overclock and the system is slow because of the ram settings.


I tried allready to put some more power on the ram or the NB but nothing helpet me, maybe i have done somehting wrong.

I also tried to loosen the timings, but doesent help ;-(.

Please can someone tell me how to setup the BIOS for this RAM to work like they are designed for!?

Link to comment
Share on other sites

  • Corsair Employees
With 4 modules on this chipset you will likely have to run the memory at DDR333 and set the timings to Cas 2.5-3-3-7 and set the memory Voltage to 2.7 Volts and see if its more stable.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...