iWingers Posted March 5, 2013 Share Posted March 5, 2013 Just got the full Corsair Link kit (already had a H100i and AX860i) and have installed them, and in the process of installing the latest firmwares. The Commander, and the Cooling Node updated perfectly. But when I try and update the Lighting Node, it goes through the bootloader process then says "Failed to Reset Node" then it tells me it can't be recognised, and asks me to unplug/plug in my molex power and try again. It then recognises it and the whole process starts again. I have Corsair Link Commander on 2.0.6, Cooling Node on 1.2.5, H100i on 1.0.4 with new fans, and trying to update Lightning Node to 1.1.9:(: Link to comment Share on other sites More sharing options...
Warboy Posted March 6, 2013 Share Posted March 6, 2013 Just got the full Corsair Link kit (already had a H100i and AX860i) and have installed them, and in the process of installing the latest firmwares. The Commander, and the Cooling Node updated perfectly. But when I try and update the Lighting Node, it goes through the bootloader process then says "Failed to Reset Node" then it tells me it can't be recognised, and asks me to unplug/plug in my molex power and try again. It then recognises it and the whole process starts again. I have Corsair Link Commander on 2.0.6, Cooling Node on 1.2.5, H100i on 1.0.4 with new fans, and trying to update Lightning Node to 1.1.9:(: Can you point out the files that you use to update commander and the cooling node? just out curiosity Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 6, 2013 Corsair Employees Share Posted March 6, 2013 There is no update for the lighting node. Link to comment Share on other sites More sharing options...
iWingers Posted March 6, 2013 Author Share Posted March 6, 2013 @RAMGUY, I have a CorsairLinkLightingFW_1.1.9.s19 file. And it's the only thing not being picked up by Corsair Link. @Warboy, found them on these forums. Might take a bit of searching. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 6, 2013 Corsair Employees Share Posted March 6, 2013 Please post a screen shot of the options tab under devices. Link to comment Share on other sites More sharing options...
iWingers Posted March 6, 2013 Author Share Posted March 6, 2013 Here is the device menu. I am aware I am running 2.2.0, but I used 2.1.1 to update the Commander and Nodes. I then uninstalled 2.1.1 and re-installed 2.2.0 as the guides have stated to do so. My LEDs are currently working, but have to be changed manually. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 6, 2013 Corsair Employees Share Posted March 6, 2013 Are you using Windows 8? if not I would suggest you request an RMA and we can replace the lighting node. Link to comment Share on other sites More sharing options...
iWingers Posted March 6, 2013 Author Share Posted March 6, 2013 Yes, I'm using Windows 8. Link to comment Share on other sites More sharing options...
Toasted Posted March 6, 2013 Share Posted March 6, 2013 Open the Firmware updater and see if you can find a entry that lists Unknown/Unidentified Node (Make sure you check that the Lightning Node is connected to that port) then locate the FW file and try update it again. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 6, 2013 Corsair Employees Share Posted March 6, 2013 I would delete any saved profiles and then UN-install C-Link 2.2.2.0 and reboot and then down load Version 2.1.1 and before you install it right click on the file and select compatibility with Windows 7 32 Bit. Then try and check the Lighting node shows up and what F/W is on the lighting node and update it as needed. then reverse the process and uninstall 2.1.1. reboot and install 2.20 in the same way or it will not work in Windows 8. Officially we do not sup[port Windows 8 at this time. Link to comment Share on other sites More sharing options...
iWingers Posted March 6, 2013 Author Share Posted March 6, 2013 Toasted, tried that before I posted it. Didn't want any of it haha RAM GUY, I have been doing the 2.1.1 for F/W (that's how I did the commander and cooling node) but haven't tried doing in compatibility mode. I'll try when I get home in an hour and post results. Thanks Link to comment Share on other sites More sharing options...
iWingers Posted March 6, 2013 Author Share Posted March 6, 2013 And now, I get on the PC and they've randomly decided to work! After all the shutting down, resetting, uninstalling business of yesterday haha EDIT: Here's the picture now. Either it shipped with 1.1.9, or somehow it rebooted with the F/W because that was the last step it needed to be updated. Either way, it's working now without any problems. http://puu.sh/2drLI Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.