OdusDriftwood Posted March 3, 2013 Share Posted March 3, 2013 I have a link cooling/lighting kit. It is recognizing every device in my PC minus the H80. Fans, LED's, GPU's, but no the H80 cooler. In order for me to get the commander to recognize anything i had to install the old version of corsair link and run a firmware update on the commander. After that everything is recognized but the H80. Please advise. Thank you Link to comment Share on other sites More sharing options...
Toasted Posted March 4, 2013 Share Posted March 4, 2013 Have you tried a different LINK Digital cable? Link to comment Share on other sites More sharing options...
OdusDriftwood Posted March 4, 2013 Author Share Posted March 4, 2013 Hey Toasted, I tagged you in this because it was your thread that i followed to get my commander working. Good Job! And Thank You. Your posts are awesome. I actually have not tried another link cable. Are you referring to the cables built into the h80 cooler box or the one behind them to plug in? The two front pin ports are for the fans so you must be talking about that plug behind them Link to comment Share on other sites More sharing options...
OdusDriftwood Posted March 4, 2013 Author Share Posted March 4, 2013 sorry, the only cables coming out of the h80 are the ones built in. so the connector between those cables and the cooling node? Link to comment Share on other sites More sharing options...
Toasted Posted March 5, 2013 Share Posted March 5, 2013 There is a port for a Corsair LINK Digital cable at the side of the H80 block. Connect one side to it and the other to the Commander unit. Example image http://www.hardwaresecrets.com/fullimage.php?image=38502 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.