skycklad Posted March 2, 2013 Share Posted March 2, 2013 Hello, some time ago I have a h100i with corsair link 2.2.0 software installed, everything worked fine until yesterday when the software displays the coolant temperature (h100i temp1) with very high values (eg. 5720.1875 right now) while the cpu temperature looks good (intel cpu temp1 = 36 ° Celsius). Is there any malfunction cooler? Is there a solution? Link to comment Share on other sites More sharing options...
Warboy Posted March 2, 2013 Share Posted March 2, 2013 Sounds like a bad sensor or something? Link to comment Share on other sites More sharing options...
Toasted Posted March 3, 2013 Share Posted March 3, 2013 Have you tried reinstalling the software? Have you tried deleting the profiles folder and sierra2_ui.cfg from %Appdata%/Corsair Link to comment Share on other sites More sharing options...
chaozhe Posted March 13, 2013 Share Posted March 13, 2013 I have same issue too..my h100i temp 65c-68c, but my processor temp is normal 30c-40c ,how can fix this issue? need to claim warranty? and my pc everytime start up the h100i led must become yellow led..but i already set to led white..until i open corsairLINK 2 software that led just become normal white.. its normal or not? anyone can help me here? thanks alot..(i am sorry..my english so poor) Link to comment Share on other sites More sharing options...
wytnyt Posted March 13, 2013 Share Posted March 13, 2013 I have same issue too..my h100i temp 65c-68c, but my processor temp is normal 30c-40c ,how can fix this issue? need to claim warranty? and my pc everytime start up the h100i led must become yellow led..but i already set to led white..until i open corsairLINK 2 software that led just become normal white.. its normal or not? anyone can help me here? thanks alot..(i am sorry..my english so poor) 65c-68c is not all that bad assuming of course thats under a full hard load.you also will not have control of link functions such as your led's until link software runs Link to comment Share on other sites More sharing options...
chaozhe Posted March 13, 2013 Share Posted March 13, 2013 65c-68c is not all that bad assuming of course thats under a full hard load.you also will not have control of link functions such as your led's until link software runs Thanks for reply..:biggrin: i not very understand english..:[pouts: that mean my h100i is normal? i only worry the h100i temp too high.. 1st me installed h100i i think h100i temp only 30c++ Link to comment Share on other sites More sharing options...
Toasted Posted March 13, 2013 Share Posted March 13, 2013 Touch the h100i tubing. Are they warm? Link to comment Share on other sites More sharing options...
chaozhe Posted March 13, 2013 Share Posted March 13, 2013 Yup..the h100i tubing are warm...only use corsairLINK2 check h100i temp 65c.. dont know what problem? Link to comment Share on other sites More sharing options...
Toasted Posted March 13, 2013 Share Posted March 13, 2013 Are the fans exhausting warm air from the radiator? Link to comment Share on other sites More sharing options...
MarianoSilva Posted March 15, 2013 Share Posted March 15, 2013 Corsair Link 2 was reporting pump temperatures of 4050 degress ( Really! ) and CPU temperatures of 3550 degrees .... I've found that if you don't have your "Regional settings" set to the English numbering notation, Corsair Link 2 will show weirdly hight temperatures .... try setting the "Decimal Separator" to a dot "." , and the thouthands separator to a comma "," . The abovementioned temperatures should have been displayed as 40.50 and 35.50 ;) That fixed it for me. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.