bush Posted February 22, 2013 Share Posted February 22, 2013 http://i.imgur.com/3bySoGK.jpg Here is my ATTO score. http://i.imgur.com/6JlBuq2.jpg Here is my Device Manager Settings. http://i.imgur.com/eUd5yqb.jpg Here is my CrystalDiskInfo. Enabled ACHI in bios in: PCH and GSATA3 Motherboard g-z68x-ud3-b3 Also updated to firmware 5.03 Can someone please help? What I am doing wrong here or missing? Link to comment Share on other sites More sharing options...
Administrators Technobeard Posted February 22, 2013 Administrators Share Posted February 22, 2013 GA-Z68X-UD3-B3 http://www.gigabyte.us/products/product-page.aspx?pid=3852#sp Chipset: 2 x SATA 6Gb/s connectors (SATA3_0~SATA3_1) supporting up to 2 SATA 6Gb/s devices 4 x SATA 3Gb/s connectors (SATA2_2~SATA2_5) supporting up to 4 SATA 3Gb/s devices Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10 * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected. 1 x Marvell 88SE9172 chip: 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices Support for SATA RAID 0 and RAID 1 If it's on a GSATA3 connection, move it to SATA3_0 or SATA3_1 and re-test with ATTO. Link to comment Share on other sites More sharing options...
bush Posted February 22, 2013 Author Share Posted February 22, 2013 Currently it is in the same SATA3_0 point. Link to comment Share on other sites More sharing options...
Toasted Posted February 23, 2013 Share Posted February 23, 2013 Backup your data and secure erase the drive with Parted magic, then reinstall Windows and run a ATTO benchmark again. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.