kleptic Posted February 13, 2013 Share Posted February 13, 2013 I have Asus SABERTOOTH Z77 ATX LGA1155 Corsair Dominator Platinum 16GB (2 x 8GB) DDR3-1866 CMD16GX3M2A1866C9 Antec Nine Hundred ATX Mid Tower Case evga 680 gtx classified the nh d14 air cooler is out of the question bc of my tall memory so I'm wondering what options if any I have that would install smoothly from the corsair liquid coolers. any advice as to what route to go would be helpful. thanks kyle Link to comment Share on other sites More sharing options...
Noircogi Posted February 13, 2013 Share Posted February 13, 2013 An H80i should work for your case and height restrictions, but if you get one, you'll also want to buy two 4-pin PWM-capable fans and a PWM Y-cable. Then connect the fans directly to the CPU fan connector on your motherboard and use the Asus fan controller software to drive them. This results in a decent, but very expensive solution. (@$100 for the H80i plus another $30 or so for the Y-cable and two fans) If you have other unused fan connectors on your motherboard, you can connect the pump RPM indicator to one of them for software monitoring. Link to comment Share on other sites More sharing options...
kleptic Posted February 13, 2013 Author Share Posted February 13, 2013 thanks for the response. I was hoping the h80i would work for me. do you have a recommendation on the fans I should get specifically? Link to comment Share on other sites More sharing options...
Noircogi Posted February 13, 2013 Share Posted February 13, 2013 Sorry, I used a pair I already had from a coolermaster V6 fansink. Just make sure they have small hubs and good airflow. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.