n30c Posted February 12, 2013 Share Posted February 12, 2013 i got my H100I yesterday and installed it and it seems to work ok but i have no fan mode options. whats am i doing wrong here. only has name device type and group. i want to be able to control my fans whats wrong? currently running corsair link 2.2. Link to comment Share on other sites More sharing options...
Toasted Posted February 12, 2013 Share Posted February 12, 2013 Did you click H100i Fan X? Are the fans connected to the H100i? Link to comment Share on other sites More sharing options...
n30c Posted February 12, 2013 Author Share Posted February 12, 2013 They are pluged into fan cable do both fan cable need to be pluged into the pump? Right niw i have both fans on one Y. Il try the other port Link to comment Share on other sites More sharing options...
svtfmook Posted February 12, 2013 Share Posted February 12, 2013 do you see the H100i in link under devices? not hydro usb, but h100i under hydro usb Link to comment Share on other sites More sharing options...
n30c Posted February 12, 2013 Author Share Posted February 12, 2013 No. Theres no seperate device. Link to comment Share on other sites More sharing options...
Ripshod Posted February 12, 2013 Share Posted February 12, 2013 We'll assume you bought from a 'high turnover' retailer and have either the 1.0.4 or 1.0.5 firmware. Next step is to get it installed properly. Have a read: http://forum.corsair.com/v3/showthread.php?t=113981 Link to comment Share on other sites More sharing options...
svtfmook Posted February 12, 2013 Share Posted February 12, 2013 No. Theres no seperate device. do this. with the computer on, corsair link closed. unplug the usb cable from the side of the pump, wait until you hear the disconnect sound in windows, count to 10 and plug it back in. wait until you hear the connect sound in windows. then reboot. once booted, open link, see if it's back. make sure the usb cable is plugged into the usb port 1 on the motherboard as well. Link to comment Share on other sites More sharing options...
n30c Posted February 12, 2013 Author Share Posted February 12, 2013 Currently have it in usb 2 with usb 1 front case il switch it. Maybe thats my problem. And then try the unplugging trick. Thank you everyone for your help so far il update with the results after work. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.