madmecca1975 Posted February 11, 2013 Share Posted February 11, 2013 should i be getting any readings in the 24 pin atx 12v (a) and the peripheral 12v (a) as they both say zero even when i run prime 95 main(A) goes up and down but other two dont register anything :confused: Link to comment Share on other sites More sharing options...
Toasted Posted February 12, 2013 Share Posted February 12, 2013 There should be some kind of reading for it. Have you tried reinstalling the software and NET. Framework 4.5? Are you using the LINK USB Dongle or is it connected to the H100i? Link to comment Share on other sites More sharing options...
madmecca1975 Posted February 12, 2013 Author Share Posted February 12, 2013 Connected to h100i will try re downloading net frame later Link to comment Share on other sites More sharing options...
madmecca1975 Posted February 13, 2013 Author Share Posted February 13, 2013 Uninstalled link software restarted pc. Installed net frame 4.5 reinstalled corsair link software restarted pc still no readings got readings in two top boxes which I take it are the watts going in and I take it the bottom ones are what amps its using is this correct Link to comment Share on other sites More sharing options...
Toasted Posted February 14, 2013 Share Posted February 14, 2013 Have you tried the USB Dongle and see if the readings display instead of the H100i? Link to comment Share on other sites More sharing options...
madmecca1975 Posted February 14, 2013 Author Share Posted February 14, 2013 Will try when I fin work Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.