darksparten Posted February 5, 2013 Share Posted February 5, 2013 The manual tells me to place a screw there but the pin blocks it, how do I remove this? To clarify, it is the built in pin in the center of the motherboard tray. Link to comment Share on other sites More sharing options...
Mr. Wunderbar Posted February 6, 2013 Share Posted February 6, 2013 I just opened my 200r and found the same thing. I don't know if it's supposed to be there or if they forgot to hollow out the standoff. Does anyone else with a 200r have a "nub" sticking out of the standoff in the middle of their motherboard tray? :confused: Link to comment Share on other sites More sharing options...
Mr. Wunderbar Posted February 6, 2013 Share Posted February 6, 2013 Now that I've had a chance to do a little research it looks like the nub is supposed to be there. Link to comment Share on other sites More sharing options...
Croaker Posted February 10, 2013 Share Posted February 10, 2013 I have the 200r and yes the nub is there to help position the MB with the back plate. There should be a hole that matches it on your MB. There is a second standoff that if you are using an ATX full format MB you will need to replace. It takes a pair of plyers or a small hex socket to remove it. Simple stuff. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.