theChisel Posted January 29, 2013 Share Posted January 29, 2013 Hey guys, I have a small issue with my AX1200i's atx 24-pin. Does anyone have a pinout for, or can possiby snap a few very detailed pics so I can perform some visual wire tracing? I have scoured the net and unfortunately havn't found much. Thanks in advance! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 30, 2013 Corsair Employees Share Posted January 30, 2013 I am sorry but the only way to do this is to search for the ATX 2.3 Pin out Spec and trace the wires back from the 24 Pin connector Link to comment Share on other sites More sharing options...
theChisel Posted January 30, 2013 Author Share Posted January 30, 2013 Ram Guy, thanks for the response. Unfortunately, my problem is that multiple pins came out of the 24-pin connector at the same time. Since the wires are not color coded I am stuck trying to figure out where these pins possibly originally went. I can't trace back from the 24 to the PSU if i don't know that the pins are installed an in their correct places. I want to salvage the cable, but at this point it seems the safest bet is to get a new one. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 30, 2013 Corsair Employees Share Posted January 30, 2013 Did it come that way or were you trying to modify the cable? Link to comment Share on other sites More sharing options...
theChisel Posted January 30, 2013 Author Share Posted January 30, 2013 No it absolutely did not come that way, and I am almost certain it's my fault for being rough with it. It was installed/removed multiple times, and so for that reason I have expressed the fact to Corsair that I am willing to pay for a new one, I'm just waiting for a reply. It has since been unsleeved, though, so I can visually trace the wires. Link to comment Share on other sites More sharing options...
theChisel Posted January 31, 2013 Author Share Posted January 31, 2013 Problem solved, I was able to borrow 1200i 24-pin from a friend and trace back to the 2 PSU connectors with a multimeter. I spread the wings on the terminal pins out a little more before reinstalling them, and they seem to be holding solid. Thanks anyway, though Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 31, 2013 Corsair Employees Share Posted January 31, 2013 Good news and I am sorry we dont have that information but I will ask the PM if we can release in the next product meeting. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.