D4S Posted January 29, 2013 Share Posted January 29, 2013 I am planning a system build and I would really like a Vengeance C70 case but more importantly the ASRock X79 Extreme11 motherboard. I know the motherboard states that it is an ATX form factor board however I know it is also slightly larger than a typical ATX board, my question is: Will it adequately fit inside the C70 case along with an AX1200i PSU? Thank you for any info you can provide! :EDIT: If it should help I have discovered the dimensions for the board are apparently Width: 30.5cm / Depth: 26.7cm Link to comment Share on other sites More sharing options...
HackAttackx10 Posted January 29, 2013 Share Posted January 29, 2013 I am planning a system build and I would really like a Vengeance C70 case but more importantly the ASRock X79 Extreme11 motherboard. I know the motherboard states that it is an ATX form factor board however I know it is also slightly larger than a typical ATX board, my question is: Will it adequately fit inside the C70 case along with an AX1200i PSU? Thank you for any info you can provide! :EDIT: If it should help I have discovered the dimensions for the board are apparently Width: 30.5cm / Depth: 26.7cm That is an E-Atx motherboard, not ATX. I do not recommend getting that case for that board... I have the 6GB and it is right against the lip of the cut out for the motherboard. Sorry Link to comment Share on other sites More sharing options...
D4S Posted January 29, 2013 Author Share Posted January 29, 2013 Thanks for the response, I thought it might have been an E-ATX but the specs on the website I am ordering it from claim it is a standard ATX hence my checking first. I guess I'll have to hunt around for a case with a similar aesthetic design and quality construction / features. I imagine this is going to take a while :( Link to comment Share on other sites More sharing options...
HackAttackx10 Posted January 30, 2013 Share Posted January 30, 2013 Thanks for the response, I thought it might have been an E-ATX but the specs on the website I am ordering it from claim it is a standard ATX hence my checking first. I guess I'll have to hunt around for a case with a similar aesthetic design and quality construction / features. I imagine this is going to take a while :( Well the 900D was announced, or were you looking for that military look? Link to comment Share on other sites More sharing options...
D4S Posted January 30, 2013 Author Share Posted January 30, 2013 After a lot of googling I have found people who have fitted other (and in a couple a cases, slightly bigger) E-ATX boards into a C70 so I have gone ahead and ordered it. There really isn't another case around (that I can find) that I like even half as much. Thank you for taking the time to respond however and all the help you've provided :) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.