eaglex01 Posted January 29, 2013 Share Posted January 29, 2013 Hi, I have 2 Corsair force serie 3 120 Gb plugged in, they both have the latest firmware and they seem extremely slow... they were in raid0... just tried to set them up in AHCI with trim and I have the same problem... here's the benchmark of one of them: AS SSD Benchmark 1.7.4739.38088 ------------------------------ Name: Corsair Force 3 SSD Firmware: 1.3.3 Controller: storahci Offset: 1024 K - OK Size: 111.79 GB Date: 2013-01-29 2:08:36 AM ------------------------------ Sequential: ------------------------------ Read: 199.74 MB/s Write: 91.46 MB/s ------------------------------ 4K: ------------------------------ Read: 14.04 MB/s Write: 52.87 MB/s ------------------------------ 4K-64Threads: ------------------------------ Read: 96.26 MB/s Write: 81.14 MB/s ------------------------------ Access Times: ------------------------------ Read: 0.228 ms Write: 0.341 ms ------------------------------ Score: ------------------------------ Read: 130 Write: 143 Total: 340 ------------------------------ Link to comment Share on other sites More sharing options...
Toasted Posted January 29, 2013 Share Posted January 29, 2013 Run a ATTO benchmark and post a screenshot. Link to comment Share on other sites More sharing options...
eaglex01 Posted February 6, 2013 Author Share Posted February 6, 2013 here is ATTO and AS SSD screenshot: if i look at the ATTO screenshot file over 128 mb seem to transfer at 500 mb (normally)... but as ssd seem to say that i transfer at 128mb read / 157 write.... which one is right? Link to comment Share on other sites More sharing options...
Toasted Posted February 6, 2013 Share Posted February 6, 2013 Corsair uses ATTO for their advertised speeds. So you would refer to the ATTO results. Link to comment Share on other sites More sharing options...
eaglex01 Posted February 7, 2013 Author Share Posted February 7, 2013 so according to these benchmark is my SSD performing as it should? it is a force serie 3 120 gb ssd Link to comment Share on other sites More sharing options...
Toasted Posted February 8, 2013 Share Posted February 8, 2013 Yes. Max Sequential R/W (ATTO): 550 MB/s sequential read — 510 MB/s sequential write Source: Corsair Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.