Faboulous Posted January 27, 2013 Share Posted January 27, 2013 Hi In panel I périhpérique Integrated USB Bridge that appears! I try a lot of things but nothing solution the problem I do not Corsairh80i that appears in the list of materials ... But Corsair Link software works and recognize my h80i the problem is that when it flashed will I fear that the blocks because it is not recognized correctly in device manager Do you have an idea? Link to comment Share on other sites More sharing options...
Toasted Posted January 28, 2013 Share Posted January 28, 2013 If the H80i is working fine, don't update your firmware. The H80i uses the default Microsoft HID drivers. Link to comment Share on other sites More sharing options...
Faboulous Posted January 28, 2013 Author Share Posted January 28, 2013 Thank you for your answer! While version 1.5 comes out you advised me not to flash? Is he going to have an update of drivers and Corsair Link? Link to comment Share on other sites More sharing options...
robandcathy Posted January 29, 2013 Share Posted January 29, 2013 Since you system is working DO A WINDOWS BACKUP BEFORE YOU FLASH ANY FIRMWARE this way you can all way restore if it does not work. Link to comment Share on other sites More sharing options...
Toasted Posted January 29, 2013 Share Posted January 29, 2013 @Faboulous If 1.0X is safe then you can flash it if you want. If you were intending to flash it to 1.04, don't do it as it can brick your unit. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.