Tommo1626863747 Posted January 18, 2013 Share Posted January 18, 2013 Hi. I have two X64 drives, one with version 1 firmware (which doesn't support TRIM) and one with version 2 firmware. Both purchased at the same time!!!! I followed every instruction given in the forums but cannot get version 2 to flash. I've asked the corsair techies for help none of which have not responded to my questions. Here's the thing. I want to run the drives in RAID0. Do the firmware versions have to match for the array to work? AND because TRIM is not supported in RAID0 is the degradation of performance noticeable in this configuration and therefore worth doing? Thanks in advance for any help Link to comment Share on other sites More sharing options...
DeeJay1 Posted January 20, 2013 Share Posted January 20, 2013 I think you have to flash the drive on a system with raid in bios disabled and ahci enabled! Link to comment Share on other sites More sharing options...
Tommo1626863747 Posted January 21, 2013 Author Share Posted January 21, 2013 Thanks DeeJay, Ive tried everything to flash this drive except secure erase it first which is the next step I think. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.