Jump to content
Corsair Community

h80i installation


rainerrocket

Recommended Posts

The fan header just gives a signal for the mobo so it knows something is connected and running (the unit uses the pump rpm for this). You don't have to connect it, but you'll have to go into the bios to disable the CPU fan warning/detection.
Link to comment
Share on other sites

  • 2 weeks later...
  • Corsair Employees
really quickly, i will not be connecting the fans to the waterblock, im basically just getting this for the asthetics, not for corsair link or any of that stuff

 

Are you connecting the fans to the fan header on the MB? If you are, that's fine if you are not planning to use the CL SW.

Link to comment
Share on other sites

  • Corsair Employees
yes i am thanks, really quickly if your still viewing, im going to be putting some antikink coils on the h80i tubing, but i cant find the dimensions of it, could you please tell me them

ok so the tubing is 3/8", would 5/8" be to big for anti kink coils?

 

Not really sure if this is necessary but you are welcome to do so. 3/8" for the tubes, not really sure because we've never tried it.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...